Gender
Male
About
Location
Phoenix, AZ
Please tell us a bit about your UAV interest
FPV
Activity Feed
"Guys, the big problem I see here (and do your homework) is the integration of the Voitlander (albeit a very nice lens) with the Sony is simply....an old technology lens (no longer produced since '09) developed for "film" cameras not "digital" i.e.…"
"so where is the rest of the story? camera setup, processes, etc. You tell the people it can do these things, but I don't hear how? I think it's just another Chris A. empty box! Same story, different day."
"You need the Datalink 2.4; PMU; GS download firmware V3.16 (will upgrade to V4.0)after install.
16 waypoint navigation; height and radius limits, etc."
16 waypoint navigation; height and radius limits, etc."
"Agreed, take care of the real immediate needs, i.e. customer service (should be #1 priority and diy's really sucks), taking care of the product pipeline in a timely manner. I fully understand the need to be prepared for the near future, but take…"
"If it's a Curtis Youngblood product (and it is)....then it's fantastic. I've followed him since the '80's and just admire at how he keeps re-inventing himself. A true asset to the R/C community and a true innovator."
"Thomas, my friends' lake house in Sportsmans World inside Hell's Gates was the only house to survive that massive fire. All the other homes had been destroyed. If you know the area, his house is the one inside the Gate's with the helipad we use to…"
"http://ninjacopters.com/
website is now up and onlinehttp://ninjacopters.com"
website is now up and onlinehttp://ninjacopters.com"
"Heading out to get new tires on, let's touch base later.
Jared"
Jared"
"these are for the "pod and boom" (center plate/arms configuration), not the "uni-frame" style frames"
"here's a pic of the top plates on the motor mount. They are interchangeable, so a customer can customize his copter.
Excuse the pic quality, I just shot it with my phone while here at the office."
Excuse the pic quality, I just shot it with my phone while here at the office."
"sure, I sent you a friend request, so respond back and we can communicate.
Being in graphics, signage, etc. for 30 yrs. I have all the toys in house to do just about anything. i.e. cnc router table, waterjet, laser, screen, sublimation, wide format…"
Being in graphics, signage, etc. for 30 yrs. I have all the toys in house to do just about anything. i.e. cnc router table, waterjet, laser, screen, sublimation, wide format…"
"Jared, you have my namesake, so from one Jared to another, I just want to say that these quads are flying really well.Watch the vid and see. Again, they are fun to make and fun to fly. I have a lot of interest in them and I prefer to keep the…"
"Thanks for the words of encouragement . The proof is in the videos. 8 minute flight time ( 20 % left in the tank), motor/esc temps are good, on a 3s 3300, and it's a fun flying frame. No scientific analysis needed, just grab and go have fun.
Again,…"
Again,…"
""better" in my opinion depends on your personal tastes as well as what you want from it. I have numerous multicopters I fly, most of them with apm boards. I have a large AP hex, fast and furious quads, and fpv 450mm size quads, etc. I haven't flown…"
"another video link
https://www.youtube.com/watch?v=eO-4mF03K_U&feature=youtu.be"
https://www.youtube.com/watch?v=eO-4mF03K_U&feature=youtu.be"
