Gender
Male
About
About Me:
Software Engineer
Please tell us a bit about your UAV interest
Just started looking into this tonight... But I'm gonna have a full arduPilot and Real Time FPV setup as soon as I can work out whats needed
Activity Feed
Hope you are well... I purchased this itemhttp://store.diydrones.com/GS407_U_Blox5_GPS_4Hz_p/spk-gps-gs407.htmand had it working however the little connector, on the adapter, which connects the cable to my ardupilot has come offit has also pulled…
Hope you are well... I purchased this itemhttp://store.diydrones.com/GS407_U_Blox5_GPS_4Hz_p/spk-gps-gs407.htmand had it working however the little connector which connects the cable to my ardupilot has come offit has also pulled off one of the…
"Went back at it with the soldering iron and fixed a few suspect solders
and hey presto its working
Thanks fro all the help guys
I'm really enjoying this project..."
and hey presto its working
Thanks fro all the help guys
I'm really enjoying this project..."
"another issue...
when I do the dipswitch settings I'm having some issues with that too
I get this...see attached
very strange too...
the dip switch is not moving
debug2.txt"
when I do the dipswitch settings I'm having some issues with that too
I get this...see attached
very strange too...
the dip switch is not moving
debug2.txt"
Hi guys... This was not working, was working and now isn't working I'm using APM v1.0 betaWhen I connect the board up I get the usual Init ArduPilotMega 1.0-BETAfreeRAM: 4051MSG: <startup_ground> GROUND STARTMSG: Demo Servos!<startup_IMU_ground>…
Apologies if this is a repost... I'm working with APM v1.0 public betaI've got the exact setup defined in the ardupilot mega recommendationseven the skyfun I was missing one of the 8x3 right angled headers so never had it conencted to any…
Guys new to all this... finally got round to building this thing I have the APM set with the IMU shield all standard as it says in the how to list (I even got a skyfun) I'm sitting here testing and it was all going well was able to get to CLI and…
Hi all... new to this, so sorry if I'm reposting or have this in the wrong place, but can't find any info on this As I say I'm new to all this... I want to set up a test environment in my workshopHowever I don't want to use batteries in this setup,…
