Gender
Male
About
Location
kanpur,lucknow
About Me:
NOW............ in Final year of my enginnering course,hope so to get a good job,but my UAV project has not been completed yet,because my college had not released the fund yet,but i am still on my way.
Please tell us a bit about your UAV interest
Very much interested in UAV's and want to continue my work along with the job after passing out from college.I want to develope spy UAV's for the Indian army so as to help them in the border with low investments in making them.Its my dream and i think i am heading towards my dream step by step,but still i had to study a lot.
Hometown:
kanpur
Activity Feed
"hi,
Can you tell me which controller you are using in this simulator? And can you give me link for the same."
Can you tell me which controller you are using in this simulator? And can you give me link for the same."
"Nice airframe sir.....but its really difficult to carry it.......rest its really awasm"
WhHello everybody,I am using XbeeXBee Pro 60mw Wire Antennapair for receving the GPS NMEA string simply using xctu.I had comfigure them both for PAN id and two more things using XCTU.but i m not reading anything on XCTU .Means on the UAV side i had…
"Sir,
well i am not using a IMU but a bunch of discrete sensors 3 axis accelerometer, single axis yaw rate gyroscope and magnetic compas having I2C interface.Earlier i had worked with them regarding getting the Digital output on LCD but i wasnt able…"
well i am not using a IMU but a bunch of discrete sensors 3 axis accelerometer, single axis yaw rate gyroscope and magnetic compas having I2C interface.Earlier i had worked with them regarding getting the Digital output on LCD but i wasnt able…"
"Sir, as i told u that i am doing this all on my own without guidance,,,so at present i m just forcing the NMEA string to go through USART1 to Tx xbee attached to it which is being received at the RX xbee attached to the laptop.Actually i didnt find…"
Here is the blog created by mine team member Anugrah along with me for our final year project "SURYAAN".Infact we were not able to complete the AUTONOMUS part with in the specified time of approx 10 month but we had completed UAV...a aeromodel along…
Hello everybody.I am working with the matlab simulink for mine auto-pilot UAV.I need to know that how will i test the simulink on a X-plane software.I had used matlab10.1 with 3 axis accelerometer and gyroscope blockset along with kalman filter and…
Hello everybody, with half of the work done in my own Amateur UAV,i am going to start work on combining the data from accelerometer and gyroscope for having the exact inclination of aeromodel inertial frame of reference with…
"alsi for HK gcs when i am downloading directx_Jun2010_redist.exe ,message comes on screen,this file has been deprecated.what does that means?
"
"
"Sir,
To be very clear i am not using ardu-pilot code for mine UAV,rather i am developing mine own programm,so how can i use ardupilot legacy in that?
I had mine partially prepared blog as www.suryaanuav.blogspot.com
well i will go through that…"
To be very clear i am not using ardu-pilot code for mine UAV,rather i am developing mine own programm,so how can i use ardupilot legacy in that?
I had mine partially prepared blog as www.suryaanuav.blogspot.com
well i will go through that…"
"well the protocol he has described there is understandable,but the problem is that how that protocol variables will update itself ,i understand that will be done with the help of programming.but that programming will be too long,so with a eye on the…"
"Sir,
well i am using my own developed auto-pilot on which i m working.I am using a GPS having NMEA 0183 output format.
I had developed a programm which can take out the latitude ,longitude,altitude ,day ,time from GPGGA string.i m thinking that…"
well i am using my own developed auto-pilot on which i m working.I am using a GPS having NMEA 0183 output format.
I had developed a programm which can take out the latitude ,longitude,altitude ,day ,time from GPGGA string.i m thinking that…"
"Hello sir,
Yesterday night i got a chat with Darren,he made me clear regarding mine question,he was just transfering the NMEA GPGGA string via XBEE to the com port of laptop,made certain changes in HK gcs,like Baud rate and he was…"
Yesterday night i got a chat with Darren,he made me clear regarding mine question,he was just transfering the NMEA GPGGA string via XBEE to the com port of laptop,made certain changes in HK gcs,like Baud rate and he was…"
well i had downloaded HAPPY KILLMORE as well as ardupilot GCS.Earlier also i had submitted posts for it,but i didnt get the reply.Actually sir i m not a student and dont have great programing skills.i had read in happy killmore GCS page that it…
hello every body, well i m little bit confused regarding use of GCS.Well if i send the same GPGGA srting of GPS through TX xbee to RX xbee which is attached with the Laptop ,will the GCS will itself do the parsing of the data…
"hi,VU HI DOAN,well i cant get yu regarding getting the readings on LAPTOP LCD.How can we add the lcd screen to the atmega16.
can you please eloborate this.Well i had homemade MAX232 circuitbut how we can digital readings on PC terminal i dont know."
can you please eloborate this.Well i had homemade MAX232 circuitbut how we can digital readings on PC terminal i dont know."
