X8 - diydrones

158 Members

Join Us!

You need to be a member of diydrones to add comments!

Join diydrones

Comments are closed.

Comments

james sowell June 1, 2015 at 12:06pm

what did u do wrong ?
Marc Cretten April 17, 2015 at 2:23pm

anyone know the airfoil used on the X8, RvJET, eBee and CastralLTD?
james sowell December 7, 2014 at 6:03am

http://www.suasnews.com/2014/12/33196/osu-to-expand-collaboration-o...
james sowell December 4, 2014 at 1:29am

http://diydrones.com/profiles/blogs/using-the-x8-and-apm-to-map-far...
james sowell August 12, 2014 at 5:31pm

http://www.suasnews.com/2014/08/30581/uav-technology-aids-in-collec...
james sowell July 17, 2014 at 7:39pm

http://www.rcgroups.com/forums/showthread.php?t=1555543&highlig...
Moderator

Dwgsparky July 15, 2014 at 6:01am

likewise,
FYI there is no mixing in the Tx , its all done in the APM. also output 1 goes to the LEFT elevon and output 2 goes to the RIGHT elevon. Set up the movements in stabilise first and when you get those correct then go to manual and reverse them as required until the MAN control is also correct.
Chad Frazer July 14, 2014 at 9:20pm

Whoever just posted about the futaba t7c setup problem pm me and I will give you my number as I had that exact setup on all 4 of my x8 versions.
james sowell June 10, 2014 at 5:52pm

http://www.findingdulcinea.com/news/on-this-day/May-June-08/On-this...

On This Day: US Postal Service Attempts “Missile Mail” for First and Last Time

On June 9, 1959, the USS Barbaro Navy submarine launched 3,000 letters 1,000 miles from Virginia to Florida via missile.
james sowell May 18, 2014 at 3:20pm

http://www.ustream.tv/channel/iss-hdev-payload

of 10

This reply was deleted.

I recently built an X8 launcher and thought that I would share the plans. The legs are removable, but at the moment, not adjustable. The trigger isn't anything special and I hope to modify it eventually. It currently is made up of a door hinge with springs welded between it and an extension on the top. The launcher that I built is rather heavy given that it is made out of iron, but the design it is based off of is made out of aluminum. Here is the link to the bungee that I…

Started by Evan Palmer

0 Replies

X8 from BevRC

Good evening out there all X8ers. I had bought an X8 from BevRC back in 2012 and have never got around to setting it up or doing anything with it. I'm in the process of getting ready to move across the country right now and I have a brand new X8 in the box it was shipped in, never opened, available if anyone is interested in buying it. If you are interested please PM me with a reasonable offer.Thanks

Started by BriFly

0 Replies

X8 Carbon with total weight 4kg

Hi Guys,I had first maiden with my X8 carbon yesterday. This is my spec:800 kV motor, max 1250 watt13x6.5 propeller2x 4S 5000mAH 25CCastle 80A ESCTotal weight 4kgmy X8 failed to take off... could someone help me to give advice about my spec, which part should be replaced or else?Thanks in advance,tq

Started by opiq

15 Replies

APM Power Module with XT60

I found out by chance that I had been running the Power Module with the 3DR radio telemetry on my 6s setup! The APM PM is rated for 18volts. The 6s Lipos at 25.2v are over the specs. Is there any power module rated for say ...... 30V? Or any other options?Thanks,Brian

Started by Brian S

3 Replies

Photos

#xg { position:relative;top:120px; } #xn_bar { top:120px; }

Hello, you need to enable JavaScript to use diydrones.

Please check your browser settings or contact your system administrator.

X8

Comments

Forum

Skywalker X8 Launcher Plans

X8 from BevRC

X8 Carbon with total weight 4kg

APM Power Module with XT60

Note: this page contains paid content.

Photos