Archangel06

"I love it! how did you interface your small 5" screen? I am interested in what you used the DIP switches for and how did you wire up the small displays for voltage MaH usage etc.........

great build. looking forward to finish mine"

Archangel06 commented on Miguel Eduardo Rodriguez Zambran's photo

"Is that the LA basin?"

Archangel06 commented on Archangel06's blog post First Nitro APM2.0 Flight - Data Collection Only!

"@Andrew
Thanks! I actually have been trying to set up the MPU6K_FILTER just for vibration. Luckily I have been spending more time redesigning my APM mount to eliminate vibration. All of the extras are more than helpful with many issues I have faced!…"

Archangel06 posted a blog post

First Nitro APM2.0 Flight - Data Collection Only!

On New years Eve I went flying with my Nitro ArduPlane. Mainly to check my config settings since my last attempted flight. This time it went much better. after tweaking my Turnigy 9X it seems to by flying fine. Next up, full Mission!

Archangel06 commented on Chris Anderson's blog post 3D printed case for the 3DR radios

"How long before this hits the DIYD Store? and will it be sold as a set? Air module case and a ground module case. Esp. the ground module. I am still looking for the apm2 straight pin header case."

Archangel06 replied to Grant West's discussion Vibration issues? in Nitro-powered Arduplane User Group

"I just Finished a few flights testing out Issues with vibration and haven't had anything terrible as far as results. I put rubber spacers from Lowe's in between the engine mount and the firewall. I also have a mount in work using 2 pieces of…"

Archangel06 left a comment on Nitro-powered Arduplane User Group

Archangel06 commented on wnqwang's blog post A small mount board to use APM 2 with KK/MWC frames

"I found a pack of 100 on Amazon for 12USD"

Archangel06 commented on Archangel06's blog post Nitro Arduplane Gets NAV and Landing Lights!

"Greg,
how have things gone in the opposite direction? and what would you need guidance with?
I am more than willing to help if necessary. "

Archangel06 posted a blog post

Nitro Arduplane Gets NAV and Landing Lights!

I know that putting NAV Lighting on Drones is common here, but I have not heard of anyone doing it to their nitro models, aside from scale modeling. So I thought I would just put up a few pictures. Thanks for supporting the Nitro-Arduplane User…

Archangel06 posted a blog post

NASA's Auto Ground Collision Avoidance System....

I want one!!! the link is below.NASA Auto-GCASwith the proper sensors we can do this right?

Archangel06 replied to Grant West's discussion Vibration issues? in Nitro-powered Arduplane User Group

"I have not yet had any major vibration issues, but I am designing a new mount for the nitro side to eliminate any posibilities. I am in the process of getting externat vibe sensors to see if / how much interference to expect. If anyone has input…"