Gender
Male
About
Location
Carlisle
About Me:
Mature Student, Wildlife and Media
Please tell us a bit about your UAV interest
Useing UAV to capture wildlife from a different angle.
Hometown:
Carlisle
Activity Feed
"To be honest it sounds like you can't be bothered to do any research
If they are similar to the hk30 3-4s 30amp esc why not buy the set the standard f30 esc? Update the firmware yourself... And while your at it pay Simon k a donation for being smart!"
If they are similar to the hk30 3-4s 30amp esc why not buy the set the standard f30 esc? Update the firmware yourself... And while your at it pay Simon k a donation for being smart!"
Hi all have a small glitch :-( I have 4 x emax 2213 motors with the keyed prop mountsso how do i turn the props upside down to do the compass mot ? Or do i just bolt the frame to the ground and do the compass motwith the props the correct way up ?…
"http://www.giantshark.co.uk/35xx-series-spare-accessory-pack-p-4049...
I believe these are similar
Available in 28 35 and other motor size
I use them and just cutthe shaft with a dremmel
Jay"
I believe these are similar
Available in 28 35 and other motor size
I use them and just cutthe shaft with a dremmel
Jay"
"Have you trimmed the copter for level flight?
In mp you can set channel seven for auto trim
http://youtu.be/FGiX-8m-6fw"
In mp you can set channel seven for auto trim
http://youtu.be/FGiX-8m-6fw"
"Hiya I am using exactly the same tx and its great might I recommend using is tutorial
http://youtu.be/5I8ehrVRhq4 it's a good explanation and all the settings are transferable to to the Er 9x software.. Hope it helps I'm using about 40% expo on my…"
http://youtu.be/5I8ehrVRhq4 it's a good explanation and all the settings are transferable to to the Er 9x software.. Hope it helps I'm using about 40% expo on my…"
Hi all have just purchased the power module for my APM 2.5removed the jp1 for power option through esc. how it was previously powered.Just a quick question.Can i connect the apm via usb with the lipo plugged in ?so i can see in mission planner power…
Deadcat Conversion with APM 2.5 upgraded mediatek GPS updated to firmware 1.9HK f30 Simon K Flashed ESC, Turnigy D2830 motors with 10.4.5 composite props.
"Sorry silly question, but have you calibrated the esc on the actual copter?
i missed this step and had a similar problem just an oversight :-)
It happens !
Jay
https://code.google.com/p/arducopter/wiki/AC2_ESC"
i missed this step and had a similar problem just an oversight :-)
It happens !
Jay
https://code.google.com/p/arducopter/wiki/AC2_ESC"
