Gender
Male
About
Location
Deutschland
Please tell us a bit about your UAV interest
FPV
Hometown:
Frankfurt
Activity Feed
"Can you show us a picture of your build?
Looks like your frame oscillates on the y-axis..."
Looks like your frame oscillates on the y-axis..."
"Looks like I got the same issue with my Pixhawk-Clone, so it shouldn't be Pixracer related:
http://diydrones.com/forum/topics/copter3-4-dev-crash-ekf-check-2"
http://diydrones.com/forum/topics/copter3-4-dev-crash-ekf-check-2"
"Does no one have an idea what could have caused this crash?!"
Hello,I had a weird crash with my big camera X8 using 3.4-dev.I had 4x 20min flights without any problem using 3.4-dev before. I used it because I needed the external Barometer...I flew it in stabilize while suddenly it rolled to the left and…
"Just flashed the 03/31 Build - That should be safe to fly, doesn't it?!"
"Did you already fly the 2016-03-30 build?
Want to flash a 3.4 dev-version but I want to make sure that its safe to fly first ;)"
Want to flash a 3.4 dev-version but I want to make sure that its safe to fly first ;)"
"@Andrew Ocejo
Yes the B101 HDMI to CSI Converter is compatible with the RasPi. People over at RCGroups are using it with wifibroadcast: http://www.rcgroups.com/forums/showthread.php?t=2454052&page=68
This board looks also promising for an AIO FC/HD…"
Yes the B101 HDMI to CSI Converter is compatible with the RasPi. People over at RCGroups are using it with wifibroadcast: http://www.rcgroups.com/forums/showthread.php?t=2454052&page=68
This board looks also promising for an AIO FC/HD…"
"How did you mount your Pixhawk?
I fixed my vibration by this omnimac anti vibration mount: http://www.thingiverse.com/thing:163472"
I fixed my vibration by this omnimac anti vibration mount: http://www.thingiverse.com/thing:163472"
"Looks like this is a bad example log for my problem...
If I fly very slow or just stand still the copter hold the altitude pretty well, but if I fly faster it dramatically looses altitude and I have to switch to stabilize to prevent a crash.
I think…"
If I fly very slow or just stand still the copter hold the altitude pretty well, but if I fly faster it dramatically looses altitude and I have to switch to stabilize to prevent a crash.
I think…"
"Have the same problem with my X8 (330kv motors, 16" propellers)
84.BIN"
84.BIN"
Hello,I've just finished my X8 build and flew it the first time yesterday.While hovering I got slow oscillations which look like my Roll/Pitch P is too low. On any control input I get overshooting which nearly leads to a crash.I also tried…
"How do I setup the aux channel for the retractable landing gear?
There are still just 27 entrys in RCX_FUNCTION - Parameter."
There are still just 27 entrys in RCX_FUNCTION - Parameter."
