Gender
Male
About
Location
Deland, FL
Please tell us a bit about your UAV interest
Fpv planes and multirotors
Activity Feed
"i flew the hex while tethered to my laptop by usb so i could log the current while flying, i attached that log file. There must be a way to unleash more power from arducopter. "
Arducopter is limiting the total power output of my hexacopter to 37 amps when it has the potential for 66amps when at full throttle.I bench tested many different motor and prop combinations to see which would be the most efficient for my arducopter…
How to program 6 flight modes into the Futaba 7C using Switch E for channel 5 and Switch A with a program mix with an offsetPIP video with Mission Planner on the Flight Modes Page and the Futaba T7C viewOpening Mission Planner to the Configuration…
"I re did my video on 6 flight modes on the futaba 7c, this time i included the endpoint changes. I also included a section at the end on how i calculated the perfect pwm for each mode using a spreadsheet. I totally geeked out on this but i wanted…"
"Thanks Joshua, I am still trying to learn Sony Studio, when i watch other videos, it like it when you can see close up and when i can see the sticks"
"your are absolutely right, i rewatched my video and realized i must have cut it out of the video by accident, one of those learning to video edit better things, thanks for letting me know, i took it down until i fix it."
I set up my first Arducopter APM 2.5 last week and had it flying in 6 flight modes by the next day.i put it on a 550 hex that i built a week ago with a kk2 controller on it. My only experience with multirotors was a quad i build a couple of months…
"this is my hex flying with the 6 modes active
stabilize
acro
alt hold
loiter
simple stabilize
land
this controller is awesome"
stabilize
acro
alt hold
loiter
simple stabilize
land
this controller is awesome"
"http://youtu.be/8lbJ6f2xc_w
i made this video after i figured out how to set up the 6 modes on my futaba 7c
i took the ideas from a couple of other posts from diy drones but used a camera and screen capture to display
link to youtube"
i made this video after i figured out how to set up the 6 modes on my futaba 7c
i took the ideas from a couple of other posts from diy drones but used a camera and screen capture to display
link to youtube"
