I just finally gathered all the cash i need for my dream copter build. The purpose of this build is to gain a higher level of expertise in the small UAV field. I am going to document the build.
Would really appreciate a review of the parts and purcha
Read more…I just went through the configuration for setting up autotakeoff on my plane. I am testing the take off as part of a route. When I trigger the route while on the runway, the motor will not spool up. I get no throttle. I tried going to full thrott
Read more…Need a heavy lift drone able to lift about 30 pounds?
Are their any good ones on the market ? If not what kind of parts would i need to build one?
Read more…Hi, my friends (*^_^*).
Do you know Benewake LiDAR is popular in helping drones altimeter, drones auxiliary landing and collision avoidance ?
Benewake is a high-tech corporation dedicated to LiDAR for Robots and drones/UAV/UAS. It is specializing in
Read more…Hi, guys. I have a problem with my hexacopter yawing constantly to the left. I've tried trimming it out on the Transmitter but apparently I can't get enough trim from that alone.
It has an Arducopter Flight controller running the latest 2.x firmware (
Read more…So, my motors do not get any signal at all. They just "beep" to signify no signal being received. If i hook them up to my receiver they can calibrate, work, etc just fine.
Currently I have the positive and negative ends removed and only hook up the si
Read more…If you want to win a FPV drone racing, there are two important points: one is your superb flight skill, and another is your good FPV drone. About flight skill, you need to do more flight training, but get a good FPV drone is easier than flight skill.
Read more…
I have tested this EDF motor based octacopter. several times. I have noticed that there always seems to be some kind of yawing without prompting.
Yesterday I have to pull the yaw stick the left in order to half the yawing. when I release the stick the
Read more…Something like a portable command system to control more than one drone at once ?
Or
A command center with multiple signals coming from it..?
Or maybe one signal to control all of them at once with added GPS positioning ?
Thanks
Read more…Not a lot of information is available about the T-motor AIR ESC calibration and configuration parameters.One of the parameters is called "Switchover". Does anybody know the exact meaning and functionality of this?As an example see the sound descripti
Read more…Hello,
I'm getting familiar with Mission Planner and now I'm able to demonstrate auto missions.
But, I'm wondering if there is a way I can make modifications to the GUI?
As in, I would like to change the color, appearance, add a button with a new featur
Read more…Хочу начать от применяемой версии Windows
Чаще всего проблемы с установкой драйверов возникают с подлинностью системы.
Windows имеет скрытую систему Администратора программы, которая отвечает за подлинность сертификатов подписи, а именно лицензия даже
Read more…i've had my quadcopter for some time and 2 of the motors havent been working so today i finally decided to replace them. when i replaced the first motor all was running fine and after soldering on the second motor, motor 1 and 3 wouldnt work resultin
Read more…Hi Guys,
I am working on RC Boat Project that later on could measure the depth,
Any sensor that needed to attach on the boat been successfully transmit data to Mission planner and Online Navigation Software except Depth Sensor.
The Scheme listed on th
Read more…I am a newbie in drone making, I plan on making a drone, using co-axial motors( basically I am sticking two motors to each other in opposite direction.)
Also, the co-axial motors will be used only for lifting the drone up. I am planning on putting tw
Read more…Greetings to everyone.
I'm looking for a new project to employ myself after nearly 3 years of unemployment. Talking with some people I think I saw something that I can do, but after a week of searching info I have bits and pieces but can't put togethe
Read more…Hi All,
I'm pretty new to the drone scene, so please forgive any newbie mistakes I might (actually, will definitely) make.
I was trying to customize the UI of QGroundControl. I do not have any real idea where to start. I read the developer pages on the
Read more…Hey, i'm working on a flight of an UAV (Piccolo Plus). I have only the log file, i'm trying to estimate the attitude of the aircraft (I have the trajectory, so I have latitude, longitude and height of each position). In the log file there are yaw, pi
Read more…hola, compañeros soy nuevo en el tema de procesamiento de imágenes aéreas y quisiera que por favor me aconsejaran con un software con que pueda la realizar de un ortomosaico de imágenes térmicas o nir, pues tengo un sensor Aero Therm UC y el software
Read more…I have arducopter v2.8 and other things but I want to make quadcopter without mission planner
so I search some information to make drone
this site: http://blog.owenson.me/build-your-own-quadcopter-flight-controller/
It works in first step Reading the Ra
Read more…