Hi everyone,
I have a question about a problem I'm having that maybe someone here can help me with. Two things are happening and I am not sure they are related.
I am using the newish Pixhawk mini directly from 3DR, so it isn't one of the clones. It i
Read more…Hi,
My team and I developed a nice tool, Open Drone Monitoring, if you're using multiple drones or flying them with your friends.
https://github.com/RReivax/ODM/wiki
It's basically a QT (C++) server that will receive and compute multiple drones data in
Read more…Dear All,
First of all, thanks for your help on this request. I'm looking to put together my first drone. I'll use a kit that includes a Robocat frame (270mm), motors and SimonK 12A ESCs. I'm planning to use a Raspberry Pi Zero W, not necessarily as a
Read more…How about using Automatic Transmission Fluid ?
Very good lubricant - High Temp and it does not thicken with time.
Very good for lubricating electric motor shafts.
DoctorBill
Read more…I bought my x650 v4 years ago. Now I want to use it again. I lost my cd with firmware and configurations set.
Could someone help me?
I will thank you in advance.
Read more…Hello.im building a quadcopter which may carry about at least 8 kg of weight.and im using 4114 330kv high pole motors.but i used cheap 40a escs.they were work fine for 3s lipo and also 4s lipo.but since motors are design for 6s, i used 6s battery.the
Read more…Hi everyone !
I'm a trainee who works to make autonomous a maverick x8 drone. For that, I have got a Pixhawk, Odroid and C++ program (c_uart_interface_exemple) which permits me to communicate telemetrically between Pixhawk and Odroid using MAVlink pro
Read more…Hi Guys, just joined the group.
I am in the aerial mapping GIS GEO applications and infrastructure capturing.
Got to a stage that I need to go long range (1-15km) Corridor surveys for pipelines. What is the next level to go for fixed wing in the market
Dear All
I am using pixhawk with mission planer . So please advice to calibrate compass. I am using Ublox M8N GPS module
Once I stated compass calibration the result is as per the following video
https://www.youtube.com/watch?v=zJDZyw18ikw&feature=youtu
Read more…I am trying to connect a LiDAR lite V3 by Garmin to a Pixfalcon with copter 3.4.6 via I2C. I can’t enable the Sonar, in the initial setup page the enable button is blacked out.
After setup is complete sonarrange and sonarvoltage both show as zero, it
Read more…Hello looking for help with my setup. If you can please and thank you I've searched for hours...the stuffF450 quad frame (homemade)Flysky fs t6 radioFlysky fs r6b receiver36mm pdb1x3a-5v ubecKk 2.1.5 mini fcTmotor air gear 200 motors & esc x4 (no bec
Read more…Last week we got the test results of E2306-2700KV from MQTB as below:
The results was tested by Ryan Harrell with MQTB and the full write up is here:http://www.miniquadtestbench.com/sunnysky-edge-lite-r2306-2700kv.html
We would quite appreciate it if h
Read more…Hi,
My team and I developed a nice tool, Open Drone Monitoring, if you're using multiple drones or flying them with your friends.
https://github.com/RReivax/ODM/wiki
It's basically a QT (C++) server that will receive and compute multiple drones data in
Read more…Hello Everyone,
I am new over here and the reason for arrival is my Interest in Drones.
I want to build one but there are various queries that remain unanswered even after going through various materials.
Please help me through this.
1) The frame size,
Read more…Dear All
I am using pixhawk with mission planer . So please advice to calibrate compass. I am using Ublox M8N GPS module
Once I stated compass calibration the result is as per the following video
https://www.youtube.com/watch?v=zJDZyw18ikw&feature=youtu
Read more…Hello all,
I am a student and am required to make a project. I have to invest at least 100 hours into it and have 1 year in order to complete it.
I am a complete beginner to drones, so I don't know how much time things take. So I wanted to ask you guys
Read more…I'm new to droning but I need help with a small project. I recently purchased an eflite payload release http://www.e-fliterc.com/Products/Default.aspx?ProdID=EFLA405 . I like to rig up a portable release that I can transfer to different drones. I tri
Read more…Hi, I'm currently trying to setup an APM 2.6 with some additional sensors and I want to use the external output pins to to turn the sensors on and off but I can get the pins to work with AP_RELAY. I think it's an issue with the PIN numbers. Does anyo
Read more…Hey guys I've got a 250 "race" quad that I've built. I have race in quotes because it could be but I'm not that good with flying yet, lol, slowly getting better. I don't have the camera or vtx yet but am looking to get one soon. I also don't have a s
Read more…hello! On my heads up display in the mission planner flight data screen, my voltage will read 0 whilst my amps will read my lipo voltage. Any ideas?
Read more…
