So I'm fairly new to drones and I sort of jumped into it with little research (granted, I was a little rushed). Now, I can't get it flying and can't figure out what is wrong with it. Can somebody please help me? Maybe tell me if I'm missing or if the
Read more…I am studying aeronautical engineering. I am in first year now. For my final year project, I am really very interested in building a solar powered flying wing. Which can fly for 5 hours or even more without any control like satellite. So from where I
Read more…hi everybody
how to implement wifi network module into DIY drone to connect it through wifi and send live streaming videos like DJI phantom & 3DR solo ?
* i'm using 3DR pixhawk and two cameras, gopro hero 3 black + storm 32 gimbal for video streaming
Read more…Hello,
I am new to the Pixhawk and I have plugged it into MP for the first time and I cannot get through the setup wizard. My process is the following:
1. Connect Pixhawk to comport and downloaded the latest firmware
2. Select comport and set the baud
Read more…Hey guys, working with a new lidar lite rangefinder. I can not get it to display data. Sonar range and voltage always zero. I have hooked it up per the wiki instructions. (double and triple checked by my self and others), proper voltage to the right
Read more…Hi,
I would like to plan a mission with many waypoint, ROI, things like that. But what I would like the most is to start a mission with a landing gear retract when I go in AUTO mode...
my landing gear deploys well on landing, RTL failsafe....
I tried th
Read more…Hi all nearly finished my peli case ground station .433mhz telemetry5.8g FPVTwin batterysAnd DVR unit
Read more…Yes. I just learned my equipment are clones but I hoping someone out there can still help me out. I've tried just about everything to get my compass to calibrate, but no luck.
So I have a APM 2.8. I have the Ublx M8N plugged in with the jumper remove
Read more…Job Title: Computer Vision Engineer
Salary: Competitive
Location: Bristol, UK
Hours: Full-time
Start Date: March 2017
We are looking for an enthusiastic and driven computer vision engineer to help us develop the software required to automatically identif
Read more…Im looking to make a quad/hexacopter for footage mostly, as well as teaching others to fly. Being relatively new to making drones and having only flown smaller quadcopters before, I would appreciate any suggestions as to how I should go about this.
As
Read more…Hi all,I would consider myself a newbie when it comes to UAVs. I've been fascinated by the growth in drones over the last few years and I finally decided I wanted to build for a few reasons. First, the cost. I don't have the money to drop $1,000-1,50
Read more…Job Title: Robotics Engineer
Salary: Competitive
Location: Bristol, UK
Hours: Full-time
Start Date: March 2017
We are looking for an enthusiastic and driven engineer to help us develop a leading edge drone for aerial inspections. This will involve in
Read more…Hi all!
I am leaving tomorrow for a 6 months trip around Asia and I would like to take my drone. I want to know if there are any regulations specific to the countries I am going to and also if it is possible to carry my drone on the plane as a carry o
Read more…Hi all, some questions:
How is PX4 PixHawk 2.1 support?
I'm debating which fork to take:
1) Pixhawk 2.1 with an application board, like a pi, for sensor processing
Is there an advantage to having separate boards for the flight control and applications? I
Read more…This is definitely one of the cooler stories out of the NFL so far this year, and possibly ever! Panthers Offensive Lineman Mike Remmers recently bought a DJI Inspire 2. After the season was over he went on a road trip and took the drone with. The sh
Read more…Hello, I'm having problems when I'm putting the photos and the location.tx file in the software to generate the mosaic. As you can see in the attached photo, everything is disorganized, someone has already gone through it and can you help me? I think
Read more…I have calibrated the imu and compass multiple times on the Pixhawk 2 but the mission planner screen is indicating that the drone is flip as shown in the attached image.
Anyone know how to resolve this?
Read more…Hi,
I've recently assembled a 450 copter using old APM 2.5, I've tried both 3.2.1 (latest supported by APM) and 3.15 yet I'm missing some parameters in full parameter list which are documented in the wiki and I can see them on Pixhawks in my other set
Read more…Just finishing build on a Volantex Ranger EX V-3 that will be used for agricultural - surveying. Would like to find someone in the Pacific Northwest interested in helping me get Mission Planner & ArduPlane set-up correctly. I have MP 1.3.44 Build 1.
Read more…Hello everyone.I have a king kong smart 100 pnp model (no receiver/transmitter supplied.I bought a flysky receiver/transmitter (see photos for receiver) and am having a hard time finding a cable to plug the receiver to the drone as there are connecti
Read more…