HI @ everyone i invented a small drone with lots of power that can easy be printed and could be used in many way´s.
i now looking for some guys to prove the construction and possible use in all thinkable ways.
Frame size
min. 320mm max 450mm
the setup
6 m
Read more…Hi everyone. I am running MAVProxy between an Intel Edison and a 3DR drone. I can establish communication between them in this way. I need to run a python program from the Edison. I need to connect to the drone in this python program. It seems I shou
Read more…Copter= 550 mm Hex, FC= Arducopter APM 2.8, TX= Turnigy TGY 9X, RX= Turnigy 9X8C V2, Motors= Turnigy Prop-Drive 28-26 1200 KVa, Props= 9" Slo-Fly (nylon), ESC= Turnigy Plush 30A (BEC 2A/5V ver 3.3), GPS= 3DR GPS with external compass, Li-Po= 5400 MaH
Read more…We recently received our new Pixhawk 2.1, and boy what a bunch of changes they have done to it mainly connectors are different and they click in which is nice. I am trying to get the most current version of PX4 flight stack on it using QGC v3.0.2. I
Read more…Hi. I'm a bit lost here. I'm an absolute beginner, I don't know anything on drones. My objective isn't to create a complex weird drone, I don't even want to create a drone with a remote control! The simpler, the better. I just want to make an X-shape
Read more…I have recently built a quad and having trouble with figuring out what C- rating I need I'm running 15 amp esc's with a25 amp burst my motors are 2204 2300kv any help would be great
Read more…Hey guys hope everybody is doing well in their Hobby life I'm in the middle of a project and I'm kind of giving up in have installed a pixhawk on a Hirobo shuttle plus helicopter, it's a 30 class nitro heli with a flybar system (it's a mechanical pit
Read more…please can you help me .
i have a quad copter . i want to connect this drone with external power supply by using a wire .
the power supply provide 12V , 5 amps .
this drone has 4 motor 700KV , maximum current for each motor 23 amps
i wanna know if i
Read more…Awesome Aerial Photography System! Optimally configured, all the best components to create an awesome aerial platform! Ready to Fly!
Pick your package with the added options - or, go frame only!
Take your aerial imaging to a new level! Tarot 680Pro Hex
Read more…Hey Guys, This is my first time on this forum.
I have spent the last week or two reading up on drones and how to build them. I have purchased a few cheaper drones and can confidently fly without crashing. I now want to get into DIY drone building. I h
Read more…Hi I have the CX-20 Opensource quad, updated to the latest available firmware version for this hardware. I keep trying to do the Accelerometer calibration but it is always off center after completing, attached is an image, no matter how many times I
Read more…Hi everybody,
From 2011 I have an old Arducopter based in the old Ardupilot 1.0 or 1.x... At that time, there were a nice wiki at google code:
http://code.google.com/p/arducopter/wiki/ArduCopter?tm=6
http://code.google.com/p/arducopter/wiki/ArduCopter2
Hi. I'm a bit lost here. I'm an absolute beginner, I don't know anything on drones. My objective isn't to create a complex weird drone, I don't even want to create a drone with a remote control! The simpler, the better. I just want to make an X-shape
Read more…Hello,
lets say I designed my own layout of Pixhawk hardware. It is based on Pixhawk schematics, so it has the STM32F4 as well as the STM32F1 microcontrollers and other components (more or less improved). Now I want upload the arducopter 3.4.4 firmwa
Read more…I've been working on a self build drone for a while now (Arris X180 model). And I have been having some issues with the F3 Flight Controller receiving power and sending it to some places. The motors aren't getting power either when I check them with
Read more…I would like to know how to startup STRSVR after a Power fail on my Win10 computer where the program runs.
I know how to manually startup, but if my Basestation server for RTK goes down due to a Power blink I would like to have an automatic startup of
Read more…Hello, everyone,
I've been using Gazebo, the Pixhawk SITL simulator and the ardupilot_sitl_gazebo_plugin package to simulate one quadrotor running the ArduCopter firmware. This is the tutorial I followed to get things working: http://docs.erlerobotics
Read more…I started 3 months ago studying Quadcopter and after that i starting building my own quadcopter. I am using stm32F as the microcontroller, and sending PID tuning gains to the MCU by a GUI i created using C#. I am using in my quad a P-PID because i re
Read more…Whenever I am running my flight controller in SBUS and connect the wires from IO Port 2 to my receiver, the flight controller, power distribution board, and receiver all turn off, however, if I just have the power plugged into my receiver from the PD
Read more…Hello.
I am trying to understand ardupilot position and attitude control for a quadcopter by reading code.
1. I was trying to understand attitude control description from the code but I don't understand the difference between target attitude and de
Read more…