I tried to control multiple vehicles in simulation using Qgroundcontrol but It is limited to independent takeoff-land. I can not plan different missions, I can plan a mission for particular UAV. I want to follow independent waypoints. So I used ROS n
Read more…The demonstration is about how to start with a LiDAR-CE30-D , including connection to a personnel computer
For more information please contact: huaxiaocheng@benewake.com
https://www.youtube.com/watch?v=93pPdhQd2T4
Read more…Help!
I accidentally opened the lens of my Pixy and I'm not sure how to reassemble it.
I attached a photo of the disassembled lens.
Any insight into how I can fix it will be greatly appreciated.
Thanks in advance!
Hi,
I just finished my build with a pixhawk 2.1 and the here GPS and was connecting it to my computer. I noticed that the compass wasn't facing in the right direction even after I calibrated it multiple times. The GPS also acts as if its moving around
Read more…I have seen hydrogen fuel cells power drones for 3 to 5 hours but most fuel cells on the market that i have seen are really overpriced!
I have also heard of goodenoughs new glass electrolyte battery coming out in a few years its suppose to have incre
Read more…I have fried three Pixhawk Mini's and I still have no clue why.
I am using the autopilot on a 3D foamy fixed-wing. The wiring setup is like this, except that:
- the 8 channel PWM board is also powering the aileron, elevator, and rudder servos (the rail
Read more…Hi
I am trying to connect my 915Mhz 3DR radio to my pixhawk using the ardupilot mission planner, but I am having trouble getting the radios to talk to one another. I set the Baud rate to 57600 as stated,but then I get an error message saying the devic
Read more…Check out the Whisp-IR thermal camera for drones. It is an 8-bit depth NTSC camera that is simple to setup with just power, ground, and NTSC video out. It is ready to be mounted onto your drone and connected to a DVR or VTx. Start flying with a therm
Read more…Hi,
My question is related with in the following command, (the syntax is approximated)
mavproxy.py --master=udp:192.168.1.1:14550 --out=COM17,57600
How to MAVProxy manages the bandwith between the udp input and the serial output?
I assume that the input
Read more…Hello - Regarding a powered tether supplying 220AC up to the drone. I see some using an expensive ($1000) TDK AC-DC converter on board the drone to convert AC to 20v DC. Any thoughts on using just a simple (cheap) windmill bridge rectifier to do the
Read more…First off! Long time lurker. Second, this is for work. It is kinda what I do. So you will be helping me solve my problem and for that I thank you in advance.So a simple solution off that bat for me is the DJI inspire 2. It has all the goodies I need.
Read more…Hi everybody! My question is about with roll-pitch-yaw and x-y-z directions. I want to keep them stable positions but if it happens a change with them, how can I detect this divergence ? That is, if an degree error happens in roll-pitch and yas ange
Read more…Hi everybody,
I'm doing some experiments with the telemetry log file (.tlog) and I'm using MAVExplorer, and know I want to generate the graph of the GLOBAL_POSITION_INT.lat in function of SYSTEM_TIME.time_unix_usec parameter, does anyone know how to d
Read more…Short story ( If you wanna skip, go ahead, it's not purely relevant lol ) :
It's my 18th birthday this 18th Feb so I dared to talk about this project and budget with my dad... Luckily he said yes! It's not for any science fair or stuff but for self-l
Read more…I tried taking off in GUIDED_NOGPS mode(MAVproxy), it shows "take off started" but nothing happens. Please can anyone help me?
I want to learn how to fake gps signals to control quad-copter in any mode.
Any help is greatly appreciated.
Thank you!
Read more…Hi! I research about IMU and ARHS. I must decide about IMU and AHRS. I want to keep stable the degrees ( roll, pick, raw - x,y,z ) of my drone. And, if there is a change in these angles, I want to learn this change from my drone. Can AHRS give me t
Read more…Skye Link is a community based, community driven marketplace about drones, regarding drones and for drones. Aside from being able to look for possible work, collaborations, event organizing and even information. An opportunity you must not pass up if
Read more…I am new in the community, I want to thank you for sharing your knowledge in the forums.
I am working to mount a Sony QX100 camera to a fixed wing, but I have not managed to remotely control the camera.
I have read many comments about the connection wi
Hi
I searched a lot regarding AHR2 and ATT. Does anybody know what AHR2 stands for and what is their difference? I`m going to use Yaw and both give this to me but what is the difference?
Thanks
Hola, buenos dias, hace unos dias le sucedio algo a mi hexacoptero lo que hizo que se accidentara, a lo que no he encontrado respuesta a ese problema en internet.
Mi drone es el siguiente:
* Frame S550 hexacopter
* 6x brushless 2212 918kv
* Apm 2.6 con p
Read more…