GPS accuracy
In mission planner I see the copter in our farm some 10 to 20 meters misplaced on google earth.
Is this a software issue or GPS accuracy.
Also it seems the orientation of the copter is off by good 30 degrees
D
Read more…In mission planner I see the copter in our farm some 10 to 20 meters misplaced on google earth.
Is this a software issue or GPS accuracy.
Also it seems the orientation of the copter is off by good 30 degrees
D
Read more…From http://code.google.com/p/arducopter/wiki/AC2_ModeSwitch
"You can control the various ArduCopter flight modes with your RC transmitter's three-position toggle switch on Channel 5."
Is this THREE-POSITION toggle switch the upper left hand-side F MOD
Read more…In the current code the sonar is used for what features of the flight?
Also is loiter entirely GPS based? Does it use Sonar?
Read more…All I want to know is what everyone uses in terms of batteries and how much flight time you get from them.
THANKS
Read more…Bonjour,
Impossible de ce connecter avec mission planner ou autre,en mode CLI non plus,toutes les LEDS semble ok, mais ....?
Je suis tout nouveau et je ne sais plus quoi faire!!!j'ai essayer toutes les solutions du WIKI
tout allais bien jusqu'à une mis
Hello
Ok now that I am out of the abyss of ESC calibration:
Could someone let me know how to make very very simple vertical lift offs, and other simple missions.
The simpler the better. I got sonar and GPS, would appreciate to learn from the gurus her
Read more…I need to check my motors in Mission Planner's Terminal/Setup. Most options work but the motors option just hangs.
Do I need to plug the quad battery?
Three of my motors just beep, though I a sure they are clibrated correctly and my RC arms the motors
Read more…Hi All
Does anyone have a link to how connectors ArduCopter GoPro Camera Mount, 2 axis to Ardupilot?
Read more…Hello
I am testing the arducopter for the first flight and all is well with arming the motors with Dx8 and seemed to be ok.
However all of a sudden in one of the trials three of the motors started beeping as soon as the quad batteries plugged.
One motor
Read more…Hello
I throttle the motors and after a few trials, suddenly the throttle lost steam and the power to motors diminished and some stop.
Is this the sign of low quad lipo battery?
And if so, why the power loss is uneven.
Dara
Read more…1. Why do I get the bad characters? Is there a terminal setup problem? Do I need to setup the terminal type e.g. vt100 and so on like the old days?
2. Also the 'MOTORS' hangs and does nothing in 'setup'. I was using this to check my motors since I can
Read more…Hello
Is this the code repository:
http://code.google.com/p/ardupilot-mega/ meaning:
http://code.google.com/p/ardupilot-mega/downloads/detail?name=ArduPlane%202.26.zip
And which compiler is used (and if any debuggers?)
Dara
Read more…Hi all. Happy holidays. Im a super noob that just got his first r/c this last monday. Built and solders the puppy in one longgggg night. :) Im trying to figure out how to connect my dx8 telemetry module to the oil pan.. I know there is the 4
Read more…From the documentation: http://code.google.com/p/arducopter/wiki/AC2_ESC
4.You will hear a series of beeps. Now drop the throttle to full down. You will hear a different series of beeps. You may now disconnect your LiPo. Your ESC is calibrated.
I thin
Read more…what should I do if the the throttle stick has top speed in the middle position, and if I adjust to top position, the speed is reduced..... is there any solution???
Read more…I am trying to avoid confusion with the older post:
From this link but there is no mention of the initial conditions i.e. the 4-wire power cable and CLI switch:
http://code.google.com/p/arducopter/wiki/AC2_ESC
This met
Read more…Hello
http://code.google.com/p/arducopter/wiki/AC2_ESC?wl=pt-BR
1) Auto ESC calibration
This method works once you have all the ESCs connected to the power distribution board and have connected all your RC cables as instructed earlier in the manual.
Fo
Read more…Hi Everyone:
The mission I want to plan is like the followings:
once I switch Auto on,
1. the arducopter will fly to the waypoint1 (33.420526,-111.9252348)
2. the arducopter will loiter at WP1 for 5 secs
3. after that the arducpter will fly to WP2
Read more…I am turning on the RC for the first time:
1. Loaded the code and got the gps running and all is well.
2. I turn on the DX8 and get THROTTLE HIGH FLAPS MIDPOSITION which is the same error whether the APM board is on or off.
I read this:
We've also had r
Read more…Hi Everyone:
I am looking at the arducopter 2.0.55 code, trying to know in detail how the auto landing works. The following is verify_land function.
I found it difficult to understand the blue sentences. It says "land at 1 meter per second", but the f
Read more…