I purchased the Liveview for my Iris+ on Friday, installed it today. Took it to the park to check it out and try it for the very first time. I've been flying my Iris+ for several months now, so I am a decent pilot.
I have seen several DIY articles with how to print prop guards but I am not rich enough to buy a printer so. Has anyone found a source for ready made ones? Rumors are that they will soon be required and I just feel better flying protected.
Read more…Hello all. I just viewed this video review of the Iris+. It appears in the video that the plane is a 3DR demo model sent to these two to test and review. My question is about how the FPV antenna is hard mounted to the shell of the Iris, not velcroed
Read more…Hello all,
I Have a hard time with my gimball on my Iris + and hope someone can help, it shakes and moves when I use it, so I followed all the info on here and updated the firmware per the youtube video...now my gimball will not operate at all! No b
Read more…Hello,
I have an issue on my IRIS+. When I fly forward, it tends to slightly rotate left and also slightly rotates around vertical axis on it's own. This makes videos of bad quality. Here is a video of issue taken: https://www.youtube.com/watch?v=_5-0
Read more…Hello,
I performed RC calibration for my IRIS+. Now, when I arm it motors do not spin. MissionPlaner reports that arming was successfull, but motors do not start spinning.
What can be the reason?
Thank you,
Roman
Read more…Hello,
I have strange video vibrations on my Tarrot connected to IRIS+. They happen only when IRIS moves sufficiently fast. Here is vibrations video sample: https://www.youtube.com/watch?v=GH103BVEVsk
Do you have any idea what might be a reason and how
Read more…When you do auto takeoff (i.e. pressing the launch/takeoff button) via Tower:
a) Does your system switch into guided?
b) Can you set the default altitude? I'd like it to come up to only about 20 feet.
Thanks!
Read more…Is there a clear concise set of instructions on how to add MinimOSD to the Iris+? Most of what I have found is geared toward the Iris and you only have to connect to the empty Telem2 port on the Pixhawk. Obviously the Iris+ is using the Telem2 port f
Read more…Does anyone know what the CG of the Iris+ is supposed to be? I've been told at the intersection of the diagonally opposed motors which make sense but I'd like to know if anyone knows for sure.
Ia m drifting backward and to the left a lot during fligh
Read more…I am buying a new Iris+ to replace my now diciest Phantom 2 V3. I have a brand new Zenmuse H3-3D gimbal and gopro hero 3+ that I was planing on putting on my phantom but now it needs to go on the Iris+ instead.
Has anyone had experience with this setu
Read more…I've recently lost my Iris+ and need to sell many extra parts and accessories. Are we allowed to post items for sale in this group?
Read more…I have probably 100 flights or so on the stock motors. I am worried about the motors going bad. What are some typical symptoms of it going bad? Will it arm? Will I get some sort of notification such as hardware failure? Also quick bonus questio
Read more…Well today I experienced a flyaway while in loiter, and the result was 2 broken arms, both on the right side.
So I proceeded to open up Pandora's box!
Seriously! To replace the arms I need to desolder and resolder the motor and led leads? Son of a bit
Read more…Obvious Rookie... sorry
I'm only on flight number 12ish but I have a couple questions and would appreciate a reply or two.
What is the max distance from remote to Iris+ to safely arm and fly?
It started beeping at me when I was 60' ish away but it only
Hey guys,
Today I took my Iris+ out for the first time in months. Beautiful day today here in Ohio. Last night, I hooked up the Iris+ to mission planner to load up the stock firmware that was issued with my Iris+ when I received it last year. I had up
Read more…Can anyone please tell me the correct name of the style of usb plug used to fit into the back of the TARANIS PLUS TRANSMITTER? I TRIED MY NAZA CABLE AND PIXHAWKP4 CABLE THEY DO NOT FIT!!! I NEED THE SPECIFIC NAME OF THE PLUG THAT GOES INTO THE USB ON
Read more…Hi – I have been flying IRIS+ for a few months, mainly to get an understanding of UAV’s as tools for environmental survey and monitoring as well as of course being cool exciting technology. As an ecologist and GIS user I am imagining lots of opportun
Read more…I have been trying to upgrade my iris+ with a new feiyu g3 gimbal. Ive watched this youtube video...https://youtu.be/93wuN27OFFUIn it they show what control switches to use, followed the instructions. However when I get to copying or we editting the
Read more…