Please tell us a bit about your UAV interest
Flight
About
Hometown:
USA
Activity Feed
"What is an auto analysis? Can you tell us step-by-step how you assess the flight? Mine is flying GREAT but I want to have some diagnostic info for peace of mind."
"So did you get them or not? If it turns out you don't like them for some reason, I'll be interested in buying one from you."
"I agree, but if it really has the Alexmos 32 bit and the integrated cabling as shown, I suspect it will be amazing."
"I would hate to buy a gimbal I couldn't tune. See my post above for some suggestions that look as good as the steadygo but are tunable."
"I'm getting footage easily on par with the Solo test footage, and equal to my dad's Inspire. It did take some adjustment.
There are now 2 new awesome gimblas that I would definitely look into, and would actually buy if someone wants to buy my…"
There are now 2 new awesome gimblas that I would definitely look into, and would actually buy if someone wants to buy my…"
"https://code.google.com/p/arducam-osd/downloads/list?can=1&q=&a......
Download the GUI for 2.0 and the firmware for 2.0. Verify you have a connection and flash the 2.0 firmware.
Then, install the 1.9 charset. I think that should do it."
Download the GUI for 2.0 and the firmware for 2.0. Verify you have a connection and flash the 2.0 firmware.
Then, install the 1.9 charset. I think that should do it."
"Huh, no. Those look really good. Mine are the grey ones on this: http://www.getfpv.com/electronics/brushless-gimbals/dys-3-axis-smar...
but I've added foam earplugs between the plates to stiffen the system."
but I've added foam earplugs between the plates to stiffen the system."
"What do you see on the monitor?"
"Can you tell me a bit more about your QAV250? I'm dying to build one just like that for high-speed FPV."
"Well, the tube was just a T-shaped tube with the ND filter on the wide end. I just cut off the base of the T to shorten the tube.
Props are these with APC .3inch OD/ 6mm ID centering…"
Props are these with APC .3inch OD/ 6mm ID centering…"
"I think any ND filter will be just fine. I had to saw part of the tube off of mine to fit it onto the GoPro with the tarot-style mount.
I should add that I am flying in Loiter mode with no vibrations and jello, and with the stock settings on the…"
I should add that I am flying in Loiter mode with no vibrations and jello, and with the stock settings on the…"
"Just wanted to say thanks for this thread, and to let everyone know that it IS doable. As of today (finally!) I got my Iris+ with DYS gimbal to generate absolutely flawless, vibration and jello free footage. It is stable on all axes.
Here are…"
Here are…"
"Heard back from 3DR. There is no way to adjust the autotakeoff altitude, as it simply makes a waypoint and guides to it. No big deal."
"Yup. Happy to share what I've got. I'll be posting some vids soon - just doing the last final tuning on my DYS gimbal. How good is your footage? Mine is close to perfect without processing, but there is a tiny jump or shake irregularly. I'll make…"
"Hmm, no, I think that has to do with the PAL/NTSC settings. In the osd program update, you might need to change it to match your VTx and GoPro / Cam. Congrats! I'm brand new to the Iris community and super glad I could be helpful.
I noticed you've…"
I noticed you've…"
"Ah, yeah. You need a 5 pin FTDI to program minimOSD. I had to connect the DTR/GRN pins to access the bootloader. You'll get it! Almost there!"
