About

Gender

Male


Location

Los Angeles, CA


About Me:

I am a fabricator. I have cnc machines lazer cutters and other various tools at my disposal. I design things for museums, hotels, and the movie industry.


Please tell us a bit about your UAV interest

I have always had a love for RCs, cars, planes and heli's. I would like to use this device in many different ways but the two first main reasons are for photography, and recreational use.


Hometown:

Los Angeles


Activity Feed

Alexander LeBrun replied to Alexander LeBrun's discussion Alternate powering method
"If I look here http://diydrones.com/forum/topics/apm2-5-5v-vcc-schematic and then look at the mystery port it looks like both power cables are tied together so I would need to cut them both, but if I did that I don't know if I would get voltage and…"
Aug 24, 2013
Alexander LeBrun replied to Alexander LeBrun's discussion Alternate powering method
"Hi Randy, I was thinking I wanted to power the apm with a seperate bec for two reasons one clean power source and second was that if for some reason I drained my motor battery I could still glide to safety with a powered apm and reciever."
Aug 23, 2013
Alexander LeBrun posted a discussion
I was wondering if there is a way to use the power module on Apm 2.5 but to not have it power the board. If I could I would like to power the board via a separate bec on the input rail then use another bec to power my servo via the output rail and…
Aug 23, 2013
Alexander LeBrun commented on Alexander LeBrun's blog post ArduPilot Purple + Skywalker X8 + FPV = Summer Loving
"@Rick m Much appreciated sir! And many thanks for jumping in here from my comments on you tube, I love living in the future. Hopefully I can get back in time today to try 'em out otherwise it will have to wait till Monday or Tuesday. Toby super…"
Jun 23, 2012
Alexander LeBrun commented on Alexander LeBrun's blog post ArduPilot Purple + Skywalker X8 + FPV = Summer Loving
"Nice call, I went back to the ArduPilot manual and READ the instructions and I did have manual trim set on my radio.  Do I set radio to neutral, calibrate and then go back to manual to set my trims in manual? Whats your flight weight that your…"
Jun 22, 2012
Alexander LeBrun commented on Alexander LeBrun's blog post ArduPilot Purple + Skywalker X8 + FPV = Summer Loving
"@ Toby Your the man! Thanks for a starting point. I plan to test it out this weekend. I have her all hooked up and programmed with your starting PIDs. She seems to react as expected with the exception that if I put it level and flip to…"
Jun 21, 2012
Alexander LeBrun commented on Alexander LeBrun's blog post ArduPilot Purple + Skywalker X8 + FPV = Summer Loving
"Thanks all!
@R Lefebvre The 319DPS reciever does have a failsafe function. Nice catch on the screws will replace as you suggested. Thanks for the heads up on the batteries, but I have a few of them still in boxes for my multirotors, I'll try em out…"
Jun 19, 2012
Alexander LeBrun posted photos
Jun 19, 2012
Alexander LeBrun posted a blog post
So I have some vacations coming up and already have some quads and a hex I figured I needed a fixed wing to round out my aerial camera fleet. (for now) heh. So I took the plunge and picked myself up an X8 to fill up with electronics. I'm running an…
Jun 19, 2012
Alexander LeBrun commented on Abe's blog post State Estimation For Aggressive Flight Using Onboard Sensing
"Super impressive gents hats off to you all."
May 16, 2012
Alexander LeBrun replied to luke hegeman's discussion Oscillation / Motor issue
"Check your motor and prop direction."
Apr 4, 2011
Alexander LeBrun left a comment for gregory Heinen
"Hey Gregory, are you "The Heinen" that's writing the code for the Ardupirates?"
Mar 13, 2011
Alexander LeBrun posted a discussion
I am looking to purchase a new radio with FPV as one of my main concerns. Right now I have a My video is being transmitted via 1.280Ghz channel at 300mW and its blasting the hell outta my current 2.4 radio. I know UHF is the way I will go in the…
Feb 8, 2011
Alexander LeBrun commented on Chris Anderson's blog post Alternative ArduCopter frames now available
"Jeremy I am not associated with the DIYDrones, I just use their excellent flight control hardware. Making frames is a side project that I started once I became addicted to UAV's. =)  I have built some complete systems for other people already once…"
Feb 3, 2011
Alexander LeBrun commented on Chris Anderson's blog post Alternative ArduCopter frames now available
"Yes Taylor they are included in the full frame kit. Right now I can fit my GoPro no problem with this gear, later Hexa versions will have gear able to accommodate small handheld HD Video Cameras. Stay tuned in the next week or two  for some pics of…"
Feb 2, 2011
Alexander LeBrun commented on James Cann's blog post I can't help it...It's an illness I tell you...
"It wants to spin cause you don't have counter rotating props, but you already probably knew that.I know what ya mean about protecting people and pets, I'll post up some pics in my blog of shrouded fan type quad Im making. Looks good though keep it…"
Jan 13, 2011
More…