About

Gender

Male


Location

San Francisco, CA


About Me:

UAV Systems Engineer and test pilot


Please tell us a bit about your UAV interest

I fly unmanmed aircraft everyday of my life :-) for work and a hobby.


Hometown:

San Francisco


Activity Feed

Charles K Taylor commented on Dmitry Skotnikov's blog post Our next significant step to build wireless power network for unlimited drone delivery
"Pretty neat. What's the benefit of a system like this over a small landing pad than transfers power? Seems like a lot of extra weight on the vehicle for this approach as well as having to push more current since the vehicle is hovering."
Nov 15, 2017
Charles K Taylor replied to Csaba Kecskemeti's discussion Drones also banned from public parks? (CA Bay area, San Jose)
"There is a red tour helicopter that flies under the bridge multiple times a day... I've been in it. I was a lot of fun obviously and the heli is moving fairly fast so not a time for a drone to get in the way. I've always wanted to fly my rig around…"
Jan 3, 2016
Charles K Taylor commented on Chris Anderson's blog post US Government starts to require open source UAV technology!
"It is not required... It falls under "Target UAS Requirements (In addition to minimum requirements)" column not "Minimum UAS Requirements""
Jun 4, 2015
Charles K Taylor replied to Chuck Spaulding's discussion Pixhawk Issue
"I think the blame falls on both sides but more responsibility should be taken by the companies, in this case 3DR, to emphasize the complexity of these machines and provide a path to learn the ins and outs of how to operate and understand them. I…"
Jun 3, 2015
Charles K Taylor replied to Chuck Spaulding's discussion Pixhawk Issue
"I usually don't jump in on conversation like this but your suggestion is way off base. The option to perform RTL with a specific behavior is %100 dependent on how you operate. What you believe to the correct behavior may result in hitting an…"
Jun 3, 2015
Charles K Taylor replied to Erik Graham's discussion Reduce vibration and jello to get smooth video. in IRIS
"If you are going to be flying a GoPro the CM3000pro is an amazing gimbal. 32bit Alexmos with dual IMU and slip ring on the yaw axis all ready to go out of the box. I've been loving mine. …"
Mar 9, 2015
Charles K Taylor commented on Doug Walmsley's blog post A Move in the Right Direction?
"FAA officially announced it Sunday morning... http://www.faa.gov/regulations_policies/rulemaking/media/021515_sUA..."
Feb 16, 2015
Charles K Taylor replied to Anna Tian's discussion Best open source autopilots v.s. commercial autopilots for conventional fixed wing unmanned aircraft usage
"Well it would be foolish not to use/test other systems out there but by no means does that mean they are porting code or anything."
Jan 27, 2015
Charles K Taylor replied to Anna Tian's discussion Best open source autopilots v.s. commercial autopilots for conventional fixed wing unmanned aircraft usage
"Not all commercial autopilot companies look at and take Ardupilot code. How do they develop something of higher quality... lots of time and hard work from a building full of brilliant people with backing from large VC firms. It's not easy to build a…"
Jan 25, 2015
Charles K Taylor commented on Chris Anderson's blog post FAA study finds trained pilots *worse* at operating drones
"While stick and rudder skills may not translate well to flying a drone, the knowledge gained from earning a private pilot liscense is essential. COAs I've been apart of in the past required our crew to have at the minimum passed the FAA Private…"
Jan 15, 2015
Charles K Taylor replied to Ragnar Myhre's discussion Crash caused by battery failsafe problem?
"Are the low voltage cutoffs disabled on your speed contollers? I havent looked at your log but maybe the LVC is starting to kick in on the ESCs"
Nov 30, 2014
Charles K Taylor replied to Kristian's discussion Almost got killed in the office today. Log file attached..
"The ESCs most people use (basically any hobby type ESC) are not very robust to interference and PWM glitches. Depending on how things are wired and what sort of EMI/dirty power and signals some equipment are generating the ESC may perceive it as a…"
Oct 30, 2014
Charles K Taylor replied to Randy's discussion ArduCopter-3.2 beta testing
"The EKF is much more robust as it leverages multiple sensors (baro and GPS for altitude for example) and it much more immune to sensor glitches, failures, and vibration. I highly recommend using it."
Oct 6, 2014
Charles K Taylor commented on Duran - ALTI's blog post SteadiDrone MAVRIK - Video
"Any ballpark price tag for just the airframe? "
Sep 2, 2014
Charles K Taylor replied to Richard Evans's discussion GPs Issues
"It is definitely possible the video tx is interfering with GPS since L1 GPS is 1575mhz, not to far from 1258. Try killing the power to the transmitter and see if GPS improves. I had a 2w on 1258 over a foot away and it still severely impacted GPS."
Aug 28, 2014
Charles K Taylor replied to Richard Evans's discussion GPs Issues
"Depending on your configuration it could be interference from your setup.  Mount the GPS up and away from the body.  I had the same issues until I shielding the plate my GPS mounts on with copper tape."
Aug 28, 2014
More…