Gender
Male
About
Location
Not Applicable
About Me:
I generally fly helis, planes(badly) and have a Quad that doesn't get used as much as it should.
Please tell us a bit about your UAV interest
Looking to upgrade my X650 and use it as a learning tool.
Hometown:
Spalding
Activity Feed
"Did you get his resolved as i am having the same issue. The quad gains height on alt hold.
Yesterday I spent £170 on new motors and props thinking it could be a vibration issue, however after changing them it still climbs :(
I darent try the return…"
Yesterday I spent £170 on new motors and props thinking it could be a vibration issue, however after changing them it still climbs :(
I darent try the return…"
HiIm struggling for finding some replacement props for my X650 which use the original P1001 C3584 brushless motor which have screw threads.I have come to the conclusion that I prob need to upgrade my motors so that I can use none threaded props.can…
Ive had an afternoon of successful flights with my quad - i'm well chuffed. I just need some more batteries now.I still have a couple of issues that I would be grateful of some assistance with.1. If after a successful flight I land and the Ardupilot…
"I had similar last week with my new setup. It turned out that I had a dodgy ESC. It worked fine on its own, but didnt work when I had all 4 plugged in which added to the confusion.
I purchased another EXC and it solved the issue.
Do you also have…"
I purchased another EXC and it solved the issue.
Do you also have…"
Hidoes anyone know if you can get a protective housing for the Ublox LEA-6H GPS module ?cheersGraham
Hitrying to write the standard parameters to the Ardupilot Mega 2.5 and Set LED_MODE Failed error message pops up.Any ideas ?thanksGraham
"ive done a bit more investigation and the motor beeps signify that the voltge input is abnormal. I have checked the power harness voltage outputs for all of the motors/esc's and they all read the same, so Im baffled why this one motor wont arm.
Ive…"
Ive…"
Hi ive installed my Ardupilot Mega 2.5+ and have followed the procedure to arm the esc's and motors and only 3 out of the 4 motors arm and spin. The motor that doesn't arm is the one connected to the rudder/yaw channel - it just slowly beeps. Ive…
