Gender
Male
About
Location
Walnut Creek, CA
About Me:
I am 15 and have a one year experience with the Ardupilot, DJI Naza, and planes
Please tell us a bit about your UAV interest
Love the Ardupilot, i use it on my Tricopter
Hometown:
Walnut creek
Activity Feed
"Will a multimeter work?"
" Can someone help me with this for amp draw http://diydrones.com/forum/topics/trouble-with-a-hex-voltage?xg_sou..."
Hi I'm trying to find out the amp draw for my hexacopter to find out if i can put a 40 amp voltage telemetry monitor in my hexacopterHere is my setup:550 frame3d Robotics 880kv motors10x4.7 props3d Robotics 20 amp esc's5000 mah 3 cell battery with…
"Chris are you going?"
"Here is a video of whats going on:"
I am trying to get my DJI NAZA-LITE to arm here is what i have:Turnigy 9x w/Er9x FirmwareDJI 550 FlamewheelDJI NAZA Lite w/ Gps3D Robotics 880Kv Motors3D Robotics ESC soldered to get motor wires shorterIn the naza assistant everything checks out and…
"Just put my hexacopter on board video up"
"ya @Chris Anderson
http://www.meetup.com/__ms11709657/SF-Drones-Startup-Meetup/events/...
It was at Paintball Jungle in American Canyon. Sorry I didn't tell you"
http://www.meetup.com/__ms11709657/SF-Drones-Startup-Meetup/events/...
It was at Paintball Jungle in American Canyon. Sorry I didn't tell you"
SF Drone meet up I just came home from the SF drone meet up. It was a blast! Here are some videos and pictures I took there. Thank you Bryan Galusha for organizing this awesome event. Please comment if you attended.Hexacopter with paintball…
"So what was your solution?"
"When will you add the US section?"
I need some help with altitude hold. When ever i switch to it, it levels for a second and then goes up. Same with loiter. Any ideas?
I recentaly fixed my hexacopter which had crashed 2 weeks earlier (Here) This is my best flight since i fixed it.Changes I made:1. Moved Apm 2.5 from the bottom to the middle to reduce compass interference.2. decided not to update to 3.0.1 because…
"@randy where do i change the FS_THR_VALUE?"
I recently watched the video on mu metal testing and i was wondering if anyone knew where to get some in California.
"Thanks could you post a picture of the inside of the canopy"
