"@andreas How large of an order can you handle? And do you work with G10 and Carbon Fiber?

Thanks

Javier
Guerrilla Drone"

"I have a pixhawk in a flip 360 and it flys awesome, but I have a defective pixhawk that already broke to expensive frames.

For small frames I'm about to try the naze32 Acro for the first time cc3d it's good too, I tried apm 2.6 in a qav250 but it…"

"Hey Sean! Man I feel u... I wonder if we could call 3d robotics and get a replacement... By u explaining what ur Pixhawks is doing I can tell u that mine did the exact same thing, in one occasion it took off at full speed sideways and missed my son…"

"your not the only one... I got the same issue..."

"Hey Darren!
My friend Johann from South Africa and I went through the Log Files, and I couldn't believe what the problem was... I had a low battery, safe mode was triggered because of the low battery signal causing the quad to fly up like crazy.…"

"Same thing happen to me today but in stabilized mode... two times it flew away, I had to flip switches to alt-hold and then back to stabilized mode to gain control of it... it sucks... im getting tires of pixhawk... :("

"Hola Daniel... yo tengo el mismo problema con Pixhawk... mi copter se voltea en cuanto llego a 50% de thortthle...

Saludos!"

"Steve!!! Thanks a lot Man!!
So, I was able to bind, but I did had to update firmware on my TX up to 1.50...

I just run a small test and pixhawk its reading ezuhf now :)
I didn't wanted to get back to u unless I had tried it... I really appreciate…"

"Hi Steve!

Would you mind posting a pic or showing me how to plug the Pixhawk with EZUHF 8ch diversity?
I've set ezuhf via USB to work as PPM through CH1; however, I'm able to power up the receiver but when I try to bind, I push the bind button, it…"

"My good man!!

Thanks for all the tips!! I will give it a try since I spend so much time trying to get this qav250 up and running I would hate to have to strip it off and start all over...

I will keep you posted and thanks again!!

Javier"

"Quick update!

Benoit I tried what you suggested and it seems like the problem was fixed... I'll have to do a test flight outdoors to be 100% sure...

Thanks!!"

"Hey Benoit!
Thanks for your help! I will try a fresh install... I'll let u know what happens... Thanks again!
Javier"