Gender
Male
About
Please tell us a bit about your UAV interest
General flight maybe some photography one day
Activity Feed
"updated so there is a bin and a log, not sure which you need.19.log"
Hi all,Recently got a tarot 650 quad up and running with a pixhawk fc.Running 3.3.2 firmware.I have had a couple of successful flights, only close line of sight, an autotune etc.It definitely needed more tuning as I dont think the autotune was great…
Hi All,Just about to get myself a quad setup for my APM2.5.After browsing the forums I see a PX4 for sale.Having never heard of it before. Is the PX4 the new best thing? Benefits of it over the APM2.5?Any advice would be great
"Thanks Chris, I wasn't emailing them to harass, I just wanted to firstly confirm that they received it and see how they were going. Thanks heaps for your help.
You seem to be the go to man when we need a response. Much appreciated."
You seem to be the go to man when we need a response. Much appreciated."
"Quick question,
I have sent my APM2 back, but havent heard from anyone. Its been probably a week and a bit since they should have received it. I emailed them to confirm it arrived, no response, emailed again 3 days later for an update, no response.…"
I have sent my APM2 back, but havent heard from anyone. Its been probably a week and a bit since they should have received it. I emailed them to confirm it arrived, no response, emailed again 3 days later for an update, no response.…"
Hey all,Wondering if someone can recommend me some PID settings for my setup. I have:- APM2-X550 cheap frame- 4 x Turnigy 2217 20turn 860kv 22A Outrunner- Gaui 8 inch props -…
"I have a similar problem.
From New my APM2 got gps lock maybe 4 times. Took 10+ minutes each time to do this.
Now... I dont get a lock at all.
I have not been able to use the APM2 successfully since new. I emailed tech support, but got no reply.…"
From New my APM2 got gps lock maybe 4 times. Took 10+ minutes each time to do this.
Now... I dont get a lock at all.
I have not been able to use the APM2 successfully since new. I emailed tech support, but got no reply.…"
"Well i'll happily be the first to say, Very impressive.
Set it up , runs like a dream, increadibly accurate when flying a mission on auto.
You've done an excellent job.
I have a bixler im setting up for fpv and ill be using this to test all modes…"
Set it up , runs like a dream, increadibly accurate when flying a mission on auto.
You've done an excellent job.
I have a bixler im setting up for fpv and ill be using this to test all modes…"
Hey all,Slowly trying to work out how to tune my quad.I have had some drifting issues and with the latest firmware it seems to have helped.As Im a newbie, im currently only flying is stab-simple or alt hold-simple while i learn and tune.I have…
"Hey,
Im no expert, there will be many people on here with much more knowledge than me.
But I am a newbie and havent used failsafe or the telemetry side of it yet, but i use the same setup but my controller is a Eurgle 9x.... same thing.
Havent…"
Im no expert, there will be many people on here with much more knowledge than me.
But I am a newbie and havent used failsafe or the telemetry side of it yet, but i use the same setup but my controller is a Eurgle 9x.... same thing.
Havent…"
Hi all,New to the quadcopter flying scene.Am looking at setting up my 9x with ER9X and am wondering what settings people use.For example, Last night i worked out to drop the max throttle in er9x so that I have more throw with the stick to make finer…
Hi All, I'm slowly working out the fine art of quadcopter building and flying but i have a few problems. It doesnt seem very stable, I can takeoff, get it to a certain height, eg. 5m, switch it to alt hold mode, with throttle set at hovering and it…
"Ok, well I automatically recalibrated the esc's. Tried it out in the backyard with various results.
There are glimmers of hope, hovers ok for a few seconds, then will start to drift. Tried auto trim mode but couldnt keep it within an area without…"
There are glimmers of hope, hovers ok for a few seconds, then will start to drift. Tried auto trim mode but couldnt keep it within an area without…"
"Sorry for the typo.
Yeah its a quadcopter, i meant to say 3 motors seem to spin up and spin down at the same rate, the 4th motor seems so spin up at the same pace, but stops a lot earlier than the other 3, so maybe its not running at the same…"
Yeah its a quadcopter, i meant to say 3 motors seem to spin up and spin down at the same rate, the 4th motor seems so spin up at the same pace, but stops a lot earlier than the other 3, so maybe its not running at the same…"
"Bump, was hoping this would be simple enough for someone to give some guidance.
Thx heaps!"
Thx heaps!"
Hi all,New to the forum and quad building.Recently finished my APM2 quadcopter build, with a 550 frame from one of those cheapo chinese sites.Build went ok, got everything wired up, followed the instructions as best i could, manually calibrated each…
