I am looking for the Aero M Camera Bay. I have performed an exhaustive search and before I design and print one I was wondering if anyone knows how to locate one? Or if there is a 3D file? (.stl) Any help would be great. Thank you.
I have been using the Iris+ for 2 years now and have bought over 4 units. With the line being discontinued, I was wondering do any CAD files exist? I, for one, would like to continue to innovate this platform. With new 3D filament getting lighter and
Read more…I have this unit and am getting less than 5 minute flight time until warning comes on. 85% Battery remaining after flight.
Total Weight: 2750g
Batt: Multistar 10000mah 4S 14.7V 10C
• Tarot 650 Sport frame with hood and electric retracts
• Pixhawk S
I took the guts out of a old Iris+ and put most of the parts on a 470mm frame. I have a Q-Brain 4 in 1 25A ESC going to cheerwing 920KV motors. During standard calibration the motors twitch and one of the motors smoked a tiny bit. This is with a 5200
I took the guts out of a old Iris+ and put most of the parts on a 470mm frame. I have a Q-Brain 4 in 1 25A ESC going to cheerwing 920KV motors. During standard calibration the motors twitch and one of the motors smoked a tiny bit. This is with a 5200
Read more…I have developed this pan and tilt gimble. It is an attempt to track IR light beacon in unison with the gopro. I have seen it done but am having a hard time making the servos cooperate. I am powering the unit independently and am trying to adjust thr
Read more…Picked this up on eBay. I think it's a BAE MIM500 series. I would love to hear any ideas on hooking it up or your thoughts on application for drone/plane. Spec sheet attached.
I am almost ready to test the Canon SX260. I have the Iris+ (Pixhawk) I am wondering if there is a good guide to wiring the setup to Pixhawk and the proper way to use it with DroidPlanner. I am really concerned with where the power is tapped from on
Read more…I have 100 acres of land to survey at 100m of height to make orthoscopic map. 50/65 overlap.
How many flights would it take to cover that area?
Read more…Hey, just joined up here after buying a PD for $200 on eBay. First thing is that the legs fell off. I am going to go through the whole "fix it" process before I even try to fly. (The enhanced guide) I hear the service from the company is non-existent
Read more…I just got a sweet deal on an Iris on ebay for $499. It showed up and seems to work fine, almost new. BUT: it has a 433MHz telemetry radio.
What am I in for with this? Am I breaking the law? Will it work well? Thoughts?
Read more…Here a custom designed holder for the standard Iris+ controller to hold a Nexus 7 tablet. 3D Print.
I was on a survey job for the Sacramento Kings new arena and I discovered a few good tips.
• Set your RTL at %30 of battery drain.
• Carry good electrical tape
• Buy a backup Iris+
• Get a lens guard for your GoPro.
I decided to allow my unit drain to 20
Read more…I just set the Iris to fly a survey mission at 30m high and around speed of 11mps.
Any setting suggestions? Results below.
I am almost ready to test this rig (see pics) but I do NOT have a cable to go to the Canon S100 into the PixHawk.
I have some wiring from another project:
• BEC Input 5a to 25a | Output 3z to 5a
• Mini USB
• PixHawk cable that came with unit
I think I
Read more…I am traveling to Cabo (Mexico) and have no clue if it is going to be too much of a hassle to take my Iris+. I have 4 batteries and a mod in the Controller. Anyone done this? Any problems ahead with Airport/Airplane/Customs? Seems a shame not to get
Read more…After a Pixhawk failure and pretty mean crash of the Iris+, I have installed 3DR replacements of the PXHK and GPS units. After extensive tuning, I have it almost where I need it (sans propellers or flying) After calibrating the ESC's, I find that in
Read more…I am interested in 3D Mapping and Survey with the Iris+. I have a modified GoPro and Tarot gimbal. I need a solution for Geotagging images through this setup or a recommended alternative solution/camera. Any help would be great. I am using AgiSoft Ph
Read more…