Gender
Male
About
Location
Guadalajara, Jalisco
About Me:
Recently graduated from Mechatronics Engineer. Planning to Study a Master on Electronic Systems, in the Polytechnic of Milan. Studying Italian. Developing projects for: investigation and commercial purposes.
Please tell us a bit about your UAV interest
Working on a new QuadCopter. Version 2.0 This time a Small QuadRotor. - New mini Control Board 5x5cm - Small motors from HK. - Custom Frame, with Q10 material.
Activity Feed
"Congratulations Jordi,
I want to add something more of what @Adrew said."You've changed the direction of a whole bunch of lives in the world", also inspire to create and develop projects like these."
I want to add something more of what @Adrew said."You've changed the direction of a whole bunch of lives in the world", also inspire to create and develop projects like these."
"Hi Melih,I have one question, how do you attach the propeller to the shaft of the motor? "as far as I can see in the photo, you didn't use the propeller saver" Regards. "
"Code Release!@Alonso Rodriguez take a look to the code!
IMU/AHRS code for the Stellaris Microcontroller Families. Using the 9DOF Sensor Stick - Main structure -> finite-State Machines, to road and write the sensors. Orientation configuration option…"
IMU/AHRS code for the Stellaris Microcontroller Families. Using the 9DOF Sensor Stick - Main structure -> finite-State Machines, to road and write the sensors. Orientation configuration option…"
"Hi Alonso,Thanks! These microcontrollers are good, TI have good technical support "E2E", another important fact, TI provide good free libraries. Like IQMath! for Fixed-point arithmetic. I use CCS v4.Of course I'll post Code and Schematics, just…"
"Hi Edi,You should use Finite State Machines. This kind of structure, will let you handle task, like some kind of "non-blocking Task". State Machines are well situated to be implemented on I2C protocols, "without Interrupts". This could make,…"
"Hi Hector,Thanks for the advice! Now, with this information, I have 2 options "from my point of view" - Place a screw in the mounting hole (with the gap below the IMU. And no foam). Or Place a screw in the mounting hole but... without the gap…"
"Hey Hi Thomas!It's good to hear from you. And thanks!@Hector I mount the IMU board, using the same method that DVD system laser anti-vibration. "Not good enough effective, for these type of applications"This time, I'll use an anti-vibration foam…"
Hi Everyone. I've been working on my Quadrotor project for one year. My last attempt was not good enough to fly. The control board worked well, but... i had problem with the frame. The frame was not enough rigid to absorb the mechanical vibrations…
"Hi Thomas,Thanks for the advices, I will improve this on the next version! =)it looks more familiar to me the topology that is in the first link.in the second link, it looks more simple but... I never saw that kind of topology.Tell me... which…"
"Hi Thomas,Here is the Schematic of my board. I hope it will be helpful for you.It will be interesting to hear some comment of you about the schematic.Regards."
