Skid, Auto mode go crazy
hello,
im using Skid output and when i put the mode to Auto the car drive crazy at full speed and it rotate to the right! im using APM 2.5 with internal Compass. i did compass calibration.
Read more…Rashed alzaabi's Discussions (20)
Sort by
MY octa drift to the right and back
Hi ,
i uploaded the latest 2.8.1 firmware to APM 2.5 and im using Octa X configuration, for the first fly i didnt done any special calibration for accelormeter or anything just only radio calibration and ESC calibration. no PID tunning. also when i
Read more…Octacopter good start?
Hi guys,
im bought Octacopter for aerial video, do you think good start for beginner ? im using APM1
Read more…Question about Arduocopter Octa
Hello,
can someone explain this method , my configuration will be Cota X , correct me if im mistaken i will use Output 1,2,3,4,7,8 and 10,11 solider the board pin? why we didnt use 5 and 6? is it for Camera mount stabilizer ?
is Hexa multicopter good to for SLR payload?
Hi guys,
I found hexa copter about 625mm I wounded if it will handle my payload?
any recommendation ?
currently I own Arduipilot 2.0 which modes is good for Ariel photography
Read more…what is the best sensor for my project "Gyroscope or accelometer" ?
hi guys,
what is the best sensor to detect moving angles, such as car moving in slope or plane going to rotate?
i want it for balancing
im confuse between gyroscope application and accelometer ?
or maybe use both of them?
Read more…thanks to Ardupilotmega Team , we won the competition using their hardware
hi guys,
i just want to thanks arduino team and arduinopoilot team for their DIY hardware, since i used it with my Autopilot project for graduation project and we also implement it with our latest competition about land mine robot.
however we didnt us
Read more…Question - any Aerodynamic info for Quadcopter? how about electric jet engine?
hi guys, i want to know what to consider when we build custom frame for Quadcore? what is the principle of the actual design?
is it possible to use Electric jet motor instated of regular motor prop ?
or no one tried it yet?
Read more…
what will happens if i put too much payload?
hey guys,
i wonder if i used DIYDRONES Quadcopter and i changed the motor + propeller it can handle heavy payload? lets 1.5kg ~ 2KG
or issue might come up with more payload using standard quadcopter?
Read more…Helicopter vs Quad/Hex etc
guys which type of copter do you recommend ?we need to use live view camera and with some additional sensorswhen we are expecting to get ArduCopter_TradHeli complete? i mean ground station + auto take off/landing ,etc?
Read more…Simple steps for Autopilot in HK GCS?
Hi guys, i want to make sure all im doing is right before i start flying my Auto pilot.
i want to know after connecting the APM with the HK GCS how can i confirm if the mission plan will work 100%
do i have to write the mission then take off manualy
Read more…how to do Ground Test?
Guys im new in APM and Flying..
but i want to test my autopilot system before i do real flying because i dont know how to fly.
this is my final year project and i want to present it so i want to do first or at less ground testing.
there is any gui
Read more…probelm with HK GCS
hi guys, im not sure if this is hardware or software issue, im trying to connect my APM using zigbee ut i got 0.21% GPS msg , when i start it , it jump to 27% then it come back to 0.20%.
i checked the baudrate in both zigbee it is 57k
i have the lates
Read more…Xplane and Arudipilot mega 2.012 issue "pics"
can some from the reading below pic tell me what is wrong?
im using APM 2.012
Read more…
Xplane and Arudipilot mega 2.012 issue
Hi guys, this is my first time to use APM with Xplane "Demo" i have issue with simulation.i edit APM_Config.h
i edit APM_config.h file
#define HIL_PROTOCOL HIL_PROTOCOL_MAVLINKRead more…
#define HIL_MODE HIL_MODE_ATTITUDE
#define HIL_PORT
Ublox , looked but 0 Sat's! ,HK GCS
Dear all i have this issue altitude and i got 0 satellite but it showing it is locked + it point the exact location.
im using APM + IMU Shield , Zigbee 900 and ublox GPS
APM 2.011 version
Happykillmore GCS latest version
GPS from DIY DRONES Arduino co
Read more…Ublox , looked but 0 Sat's! ,HK GCS
Dear all i have this issue altitude and i got 0 satellite but it showing it is locked + it point the exact location.
im using APM + IMU Shield , Zigbee 900 and ublox GPS
APM 2.011 version
Happykillmore GCS latest version
please advice!
Read more…Arduino Uno and Ardupilot mega , are they the same in the code?
Hi guys , well i know Ardunio uno and APM are different in processor and other things, i found this project but im not sure if i can download the code and upload it into my APM if it will work or not
can someone check and confirm please ?
Read more…
Test APM in Car
Hi gus i wonder if i can test an Electric R/C car using APM hardware to do the ground testing before the actual flight, is that possible ?
here my Setup :
-APM main board
-IMUs board
-Xbee 900
-Ublox gps
Read more…
