"Sensefly has been bought by Parrot some time ago, so it was just a matter of time for them to go multirotor, and i guess this one was developed in cooperation with the Parrot ArDrone Team. I like the fact that i will have a thermal camera, apart…"

"Honestly i don't see this happen soon, maybe ten years from now, but right now there are lots of variables for it to fail.
I agree with Jesse, too much liability, thefts etc...

-What if i'm playing with my quadcopter at the backyard, how does…"

"RCTimer includes the slip ring with the motor, but if you want just the slip ring alone you can try here: http://www.adafruit.com/category/34 they have several to choose from."

"Hi jeter,

I used 2mm and 1.5mm, but you have that identified in each part in the image and source file above.
Cheers!"

"Hi Gabriel, 
Your Welcome ;)Crossed bridges would add more weight because of bigger part and screws, not a big difference but still some grams would be added. I did not intend to use the crossed bridges with the 4 holes, that would add 2 more rubber…"

"Hi Gabriel,
Thanks ;)
Unfortunately i dont sell the Kit, due to high cost of materials it's almost impossible to sell it for a reasonable price. I would really like to have some fleet of my own designs that i could sell, not only for profit but…"

"Hi Legot, i've not used this OSD for a while, but i remember that too much voltage was causing the issue, try powering the OSD with a 2S lipo i believe that should do the trick"

"Check flyduino, they recently have in stock a motor made for AM, they also sell the AM Gimbal control board.

I'm really looking forward to see the evolution in Gimbals, now with the AM and new Dji Zenmuse for GoPro ;)"

"Well done ;)
Just a question, how do you get 20-25 minutes with a single 5000mha Lipo?, I have built a hexa with similar characteristics as yours, same weight,14" props, same motors but the 600kv version, and with 2x 3300mha Lipos i hardly get 8~9…"

"- Yes the Gemfan props are very good, I'm happy with them. I bought them from flyduino.net.
- I can't predict right now when it will be available to sell, it's still a prototype and i want to do more changes to improve it.
- Obrigado Rui, sim, de…"

"Hi all, thanks ;)
- Yes, my plan is to sell the kits, but i'm still prototyping and learning from mistakes.
- For the  frame i'm using 1.5mm and 2mm CF Sheet, 22mm CF booms, quadframe.com clamps. Ive also designed a clever and cheap vibration…"

"He would probably be miles away by the time cops have the quad and gear assembled."