When I tried to load the Param file for my plane Mission Planner froze. I had to force quit the program. I tried again and same results. I am running MP 1.2.73 on a Microsoft Surface Pro with Windows 8. Additionally to the problem above, everytime
Got my Quad flying with 2.9 after some time. I have downloaded the logs but can't seem to find where the Accel X/Y/Z data is to check the vibration. Can some explain where I would find this in the log, there seems to be 100's of lines of data.
I would like to know the setting to adjust the throttle setting that is used during RTL. When I activate RTL the throttle is advanced to 75% (I think as this is the maximum autopilot setting), the aircraft (Skywalker 1900) gains altitude very slo
I have disabled my airspeed sensor for APM control but have it enabled for indication because when it is enabled for APM control my Skywalker seems to slowly loss altitude when I select RTL mode. Once I disabled the airspeed sensor for APM control th
Can someone explain how to setup RSSI for my EZUHF to show on my Minim OSD? Do I select a spare channel on the EZUHF and configure it to have RSSI? Where do I plug that channel into the APM and how do I get it to read on the OSD?
When I switch to RTL mode the aircraft turns back to home and begins to circle, but when RTL mode is selected it slowly starts to decend and eventually I have to take over. I have 100 M. selected as my default alt. I have a APM 2.0 with 2.60 firmw
I have just updated to Ardupilot 2.60 and MP 1.2. Its all went well but the attitude indicator shows the the APM 2.0 pitching up and down (+5/-5 deg.) on its own without any movement to the APM 2.0. I have done all the normal set-up procedures (radi
I need some help setting up and testing failsafe. Here is what igot so far:Rutabaga 8J when switched off the throttle ppm drops to 911 as seen on Mission Planner. I think I may have the settings in MP param not set correctly. The online infor for fai
Is the a way to add an external GPS to the APM 2.0 that has an onboard GPS? I have mounted my APM into a Long Range FPV 168 and would like to mount the GPS antenna on the upper fuselage for better reception. Alternatively does the DIYDrones Store s