"This is quite interesting indeed. I might try to experiment with this.
I have a Neo-M8N and an arduino, and an SD card reader/writer.
Would obtaining the files for RTKLib be as simple as just logging the gps output similar to what is described…"
"After having been extremely excited for this news from Transport Canada, and after having gone through the new regulations with a fine tooth comb, they are actually quite disappointing.
Particularly the 9km away from 'built-up' areas rule.
So…"
"I think I'm experiencing the same problems as described in the OP.
I have the RCtimer apm 2.5 and when I first got it i connected via USB to MP and loaded on the arduplane firmware.
However now the USB connection seems to not work properly. The…"
"Was just looking at the code between AP and IMU.
Looking at the output code from the IMU and comparing the variables to what I found in the GCS_Standard header in AP, they don't appear to be consistent. ie. for roll, pitch, etc.
Maybe I'm just…"
"Alright so this morning I hooked everything up again and I did notice that the IMU wasn't flashing the blue GPS LED, so I debugged the GPS data in RealTerm, and it seems that it somehow had reset the baud rate to its default (9600), I programmed it…"
"Thanks for the replies guys. Doing some google searches on the discussion groups on DIYdrones there appears to be some lingering discrepancies abut the compatibility. http://diydrones.com/forum/topics/arduimu-v3-and-ardupilot
Chris Anderson replied…"
Hello everyone, I've been trying to find a definitive answer to a problem I've been having for several days and I'm really hoping this community can help.1. Is the arduimu+v3 a direct replacement for v2? Is it compatible with ardupilot legacy as the…
"Hi Harry,
I have the Ardupilot legacy and the Arduimu+V3, I can't get them to work with each other using the most up to date codes. How did you manage to get them to work with each other?
"I was also under the impression that arduimu V3 would work with ardupilot legacy according to the code. However after a week of troubleshooting I can't get them to work with each other...
If anyone has a fix please share."