Gender
Male
About
Please tell us a bit about your UAV interest
Like taking pictures with uavs
Activity Feed
"Did you test the KISS ESCs?
There is a new edition with 24A continuous (shunt controlled) and 32bit MCU."
There is a new edition with 24A continuous (shunt controlled) and 32bit MCU."
"Hey all!
Yes, i was talking about the delay. The cable modification gave me a constant delay of maybe 0,1s. With the IR-Shutter i had everything: 0,1 - 1s, or even no shutter when the sunlight came in. So i got a big improvement in reliability AND…"
Yes, i was talking about the delay. The cable modification gave me a constant delay of maybe 0,1s. With the IR-Shutter i had everything: 0,1 - 1s, or even no shutter when the sunlight came in. So i got a big improvement in reliability AND…"
"++
yes, that would be a great improvement.
Bugfixing and increasing the reliability of AC 3.2 (For APM and PX4)
New Features for PX4-Platforms with a split to AC 4.0.
@Jason,
yes, thats wright! But in the past there were some major problems with…"
yes, that would be a great improvement.
Bugfixing and increasing the reliability of AC 3.2 (For APM and PX4)
New Features for PX4-Platforms with a split to AC 4.0.
@Jason,
yes, thats wright! But in the past there were some major problems with…"
"Great work!
How many pictures did you shoot? At witch GSD?"
How many pictures did you shoot? At witch GSD?"
"Hello Marcelo!
I tested your sketch yesterday. Works!
One thing i noticed is the heading. It must be sent in 2 degree steps. I get a heading from~ 1-140°
Hello Michel!
How can i flash the hex file to my Pro mini? Do i need a special ISP?"
I tested your sketch yesterday. Works!
One thing i noticed is the heading. It must be sent in 2 degree steps. I get a heading from~ 1-140°
Hello Michel!
How can i flash the hex file to my Pro mini? Do i need a special ISP?"
"Thanks for sharing!
I will try it as soon as my new AUAV-X2 arrives (small pixhawk comp. controller board)."
I will try it as soon as my new AUAV-X2 arrives (small pixhawk comp. controller board)."
"Very nice - but sorry to say, nothing new...
The autoquad project does closed loop control with CAN-bus and ESC Datalogging and thrust control for some time now.
Take a look at http://autoquad.org/ maybe you can use the ESC32 for first testing of…"
The autoquad project does closed loop control with CAN-bus and ESC Datalogging and thrust control for some time now.
Take a look at http://autoquad.org/ maybe you can use the ESC32 for first testing of…"
"Hi all!
@iksess,
i had the same problem with the IR-Trigger and NEX. Missing pictures and the delay was not constant.
So i modified my NEX 5N in this way:
http://photoshipone.com/10/sony-nex5n-trigger-modification/
(attached a cable to the shutter…"
@iksess,
i had the same problem with the IR-Trigger and NEX. Missing pictures and the delay was not constant.
So i modified my NEX 5N in this way:
http://photoshipone.com/10/sony-nex5n-trigger-modification/
(attached a cable to the shutter…"
"Hey,
i don't understand why it is not logged complete. Try to delete all old logs on your APM, set the CAM_TRIGGER_DISTANCE to a low value, maybe 10 meters. You can walk along the street and create a nice log and some bad pictures. Thats maybe…"
i don't understand why it is not logged complete. Try to delete all old logs on your APM, set the CAM_TRIGGER_DISTANCE to a low value, maybe 10 meters. You can walk along the street and create a nice log and some bad pictures. Thats maybe…"
"Okay, i didn't know that. So you can just do georef by time offset, but thats very unprecise.
You should try to find a way to trigger your camera with the pixhawk. This gives a better result. This is also better, because the time between each photo…"
You should try to find a way to trigger your camera with the pixhawk. This gives a better result. This is also better, because the time between each photo…"
"Hey David,
the first bin was the right one. But there are no CAM messages recorded, please check your log settings.
The CAM message look like this one:
CAM, 481236600, 1804, 53.4139451, 8.0163265, 94.07, -26.10, 2.87, 75.31"
the first bin was the right one. But there are no CAM messages recorded, please check your log settings.
The CAM message look like this one:
CAM, 481236600, 1804, 53.4139451, 8.0163265, 94.07, -26.10, 2.87, 75.31"
"I just tried to open the logs, but these are the wrong ones.
you uploaded the logs from the mission planner only.
Recording telemetry
Mission Planner:
MAVLink telemetry is automatically recorded when MAVlink is connected. Files are in your “logs”…"
you uploaded the logs from the mission planner only.
Recording telemetry
Mission Planner:
MAVLink telemetry is automatically recorded when MAVlink is connected. Files are in your “logs”…"
"Hey David,
please upload your fotoset and the log to a one-click-host (http://uploaded.net/ would be nice (free for upload)). I will give them a try.
Besides from some missing pictures, i am very happy with the cam message ref."
please upload your fotoset and the log to a one-click-host (http://uploaded.net/ would be nice (free for upload)). I will give them a try.
Besides from some missing pictures, i am very happy with the cam message ref."
"Hi Cao!
I think you have to increase the I-terms in Rate and Stabilize Controller."
I think you have to increase the I-terms in Rate and Stabilize Controller."
"Is it possible to use the M8 with 10Hz update rate in Plane and Copter? Would be great for geotagging images!!"
"For this long flight time, normal Lipos are not the best choice.
Take a look at the Panasonic NCR18650B LiIon Battery. Capacity ist 3400mAh, 3.6V and just 46g. But they deliver just 2C. So you can pull between 6 and 7 Amps per cell.
266 Wh/kg -…"
Take a look at the Panasonic NCR18650B LiIon Battery. Capacity ist 3400mAh, 3.6V and just 46g. But they deliver just 2C. So you can pull between 6 and 7 Amps per cell.
266 Wh/kg -…"
