About

Location

Saint Louis, MO


Please tell us a bit about your UAV interest

Helicopter and Autogyros


Hometown:

St Louis


Activity Feed

flymetothemoon replied to Rory Paul's discussion St Louis MO
"I'm also interested in knowing where to fly.  New here and was wondering where the acceptable areas to fly were.  I just have two quads I fly"
Jul 19, 2015
flymetothemoon commented on flymetothemoon's blog post Transporter 3D: Versitile Fpv 3D or 2D for Rift or other 3D based goggles
"Me showing it off at least a prototype:
https://www.youtube.com/watch?v=63a-XrEM354"
Oct 22, 2013
flymetothemoon commented on flymetothemoon's blog post Transporter 3D: Versitile Fpv 3D or 2D for Rift or other 3D based goggles
"Yah I will go pick up a hdmi recorder.  In the mean time look at this.  This is taken off of the T3D and T3D cam at least the old cam I believe:
https://www.youtube.com/watch?v=2zEBtvfoE3c&feature=c4-overview&......"
Oct 22, 2013
flymetothemoon commented on flymetothemoon's blog post Transporter 3D: Versitile Fpv 3D or 2D for Rift or other 3D based goggles
"What do you guys want to see tested?  I will be shooting videos of the system in action"
Oct 22, 2013
flymetothemoon commented on flymetothemoon's blog post Transporter 3D: Versitile Fpv 3D or 2D for Rift or other 3D based goggles
"If you mean the entire unit on a vehicle, no, since you would then need digital transmitters since the rift takes hdmi and dvi only.  The transporter unit doesn't need to be in the air as it's the analog to digital converter needed for the rift and…"
Oct 14, 2013
flymetothemoon commented on flymetothemoon's blog post Transporter 3D: Versitile Fpv 3D or 2D for Rift or other 3D based goggles
Oct 14, 2013
flymetothemoon commented on flymetothemoon's blog post Transporter 3D: Versitile Fpv 3D or 2D for Rift or other 3D based goggles
"Maybe.  They don't look wide angle.  I will get clarification on this.  Here's a vid showing it off with the T3D.
https://www.youtube.com/watch?v=0VeUikvM3ac&list=UUbM8PtxYK5qhvK..."
Oct 14, 2013
flymetothemoon commented on flymetothemoon's blog post Transporter 3D: Versitile Fpv 3D or 2D for Rift or other 3D based goggles
"@RC tech
Thats one way of viewing through the rift.  Here are all the combinations known present that you can do to view through the rift:
1.     1 cam 1 vtx = massive fov 2D viewing or any viewing since you can zoom the picture in and out.
2.     1…"
Oct 13, 2013
flymetothemoon commented on flymetothemoon's blog post Transporter 3D: Versitile Fpv 3D or 2D for Rift or other 3D based goggles
"@SaadTiwana

So below is whats from the website.  I missed some info.

"The T3D supports 2D video, single channel encoded 3D video and dual channel 3D video for the ultimate resolution 3D experience.  To leverage the 3D capabilities we redesigned…"
Oct 13, 2013
flymetothemoon commented on flymetothemoon's blog post Transporter 3D: Versitile Fpv 3D or 2D for Rift or other 3D based goggles
"@Alejandro Martin Pirola
Of course you choose two different channels that don't run into each other.  A different spin is nkw you have redundancy.  If you're normal fpv transmitter goes down you're out of luck.  With stereo cameras you can fly…"
Oct 13, 2013
flymetothemoon posted a blog post
So it's been a long time since I was on diydrones but I wanted to reach out to a lot of you guys that fly fpv and happen to own a pair of 3D goggles.  Maybe an oculus rift or some cinimizers.  Now with the Transporter 3D (aka T3D) you can do 3d fpv…
Oct 12, 2013
flymetothemoon replied to flymetothemoon's discussion Support for Coaxial Helicopter?
"I have my coaxial setup so anytime you guys are ready.  It now has brushless motors with turnigy 6A escs and I'm using a vtail mixer for motor control but that can be taken out."
Oct 9, 2012
flymetothemoon replied to robincfey's discussion Oculus Rift VR goggles
"Not sure anyone noticed this but the video feed not only has to be stereo but it also has to be warped for the lens to give you that 110 fov.  I pledged too but I'm hoping someone can come up with a filter system through a computer to render…"
Oct 2, 2012
flymetothemoon replied to flymetothemoon's discussion Support for Coaxial Helicopter?
"So my version 1 didn't work out, but I should be building v2 very soon.  I had too much flex and the blades ran into each other.  So whenever you would like to start code testing just give me a shout."
Sep 5, 2012
flymetothemoon posted a discussion
I've looked for a section all over the program and even though I can find the swash plate settings for a 90 degree swash I don't see anything for designating the motors for yaw control.  Is there support for this kind of helicopter?
Aug 20, 2012
flymetothemoon replied to Adam Bedard's discussion Is there any interest out there to adapt the ArduCopter for a coaxial rc helicopter?
"Has there been any progress on implementing arducopter with coaxial helicopters?"
Aug 20, 2012
More…