"yep that s what i was sayin, i ll try maybe tomorrow see how it goes.
thxx a lot for your time!"

"oki i ll do that tomorrow.

thxx a lot!"

"hi andré,
thx a lot for your time.
on another forum i got a response saying that if cruise mode is not working it s simply because the plane is not moving because i am doing static test.
if i was flying, so moving, it would work.
can you confirm?…"

"hi andré,
i ve cleaned all the logs, and regenerated a new one, here we go.
thank you for your time
best regards2015-11-25 08-45-28 1.bin2015-11-25 08-45-28 1.bin.log"

"Hi,
I ve did it with mission planner.

I ll post another log tomorrow. Do i get thro to eero because the plane is not moving?

Thxx for your help"

"hi,
so i ve did a new test, and (from your link) i ve seen that i could disable arming_require, wich i did.
i can fly in manual mode still, but when i switch to any assisted mode, throttle gets cut.
here is the log, thx for your time, tell me if you…"

"Thxx bill i ll regenerate a log file, but first of all i ll go through the link you gave me.
Thx again,  i keep you posted in a cpl of hours "

"hi chris,
now i ve fixed the issue, but i have this one, any ideas?
thxx for your time
best regards
http://diydrones.com/forum/topics/help-arduplane-no-more-throttle-a..."

"here is what i do:

power the plane, switch in manual flight mode , throttle works.
lets say i move the thro stick to 50% then switch to stabilized mode, after two sec, throttle is cut, and if i switch back to manual mode, can t get the throttle to…"

"nobody has a clue :'(((("

"just set rc1_rev to -1 and now it all works :))))))"

"hi,
thx a lot for your message, i guess apm did manage my channel assignement, cause in stabilized mode, all behaviour are correct except ele is reversed. i have 2 channels for aile (2&5) they works fine.
how come the the radio calibration menu, if…"