hi folks,
i ve been running apm 1.0 ages ago, with a great pleasure.
now i am coming back with an apm 2.6 and i am facing an issue, that i dont understand at all.
when i power my plane in manual mode (i ve disable arming_require) everything works fine.
B
hi folks,
finishing my plane, and did some testing.
I am facing one issue regarding throttle.
In manual mode everything is fine, when i switch to stabilize mode, no more throttle, same for rtl.
am i missing something? first time it does that to me.
thxx f
Read more…hi,
i am setting a new plane for some experimentations, and i am facing an issue i never had before using apm, that s why i am here on my knees asking your help.
ELE is on chan 1 works perfectly in manual mode, but goes wrong direction in stabilize or
Read more…hi,
since i tried to plug my android phone using OTG and droidplaner, my arducopter is a nightmare, can t arm it anymore, sometimes no led sequence (a,b,c) weird beep , radio is fine calibrated) i ve recorded a video for you, if you have any clues, pl
Read more…hello folks,
i would like first of all, all the people here that took some times for answer to my questions, helped me out how this arducopter works, you are all part of my loiter succeed :)
i wanted to share this video with you, cause i ve often heard
Read more…hi,
after have been facing a loiter mode issue, i ve discovered that even the blue light on the gps is solid, the red light on oil pan still flash, unless i connect it to the apm.
is it normal behaviour?
if not, what should i do?
thx for helping
Read more…hi,
today i ve tried the gps hold and it was quite weird.
everytime you enable it, it hold for 2 sec, then aile left on 10 m then ele and go away.
i ve check on my apm if it s loiter mode and not something else, and it is loiter mode that is enable.
here
Read more…hi everybody,
i just installed the optical flow, and i wan ted to make sure certain point.
when you enable optical flow, is used when you enable alt mode?
Is it used when loiter mode is enable too?
what is the max height for that kind of sensor to work?
t
Read more…hi,
well it s all in the title, is it possible?
thx for help
herve
Read more…hi,
nothing much is showing on the apm when i play a log file.
This is a video exampel of a flight i did yesterday, gps light was solid blue, so it mean at least 5 sat (only 2 notified in the video) and instruments not moving much.
did i missed somethi
Read more…hi,
i have this 4 pin sensor ar home
, and i was wondering if it can be used in complement or instead the classic sensor.
Anybody succeed using these object avoidance?
anybody tried?
thx for your time
Read more…hi,
i ve seen in the last update that optical flow can be enable throught the mission planner, so i ve ordered one :)
i have a cpl of questions:
in what mode exactly is it working?, improving the use of the sensor in alt mode?
How do you proceed to use i
Read more…hi folks,
somebody just bring me a nice 3 axis camera gimbal, and he would like me to find a nice sharp way to stabilize it.
it s a 360 degre one
he tried the fy20a but not worth it, do you think ardupilot as standalone could do the job?
anybody tried it
Read more…hi,
on a dx7, we have a 3 pos swwitch that allow to set a normal/alt /loiter mode switch.
on a dx7 we also have the gear switch, i ve set the pwn on this position for act as rtl, but nothing happend.
Are flight mode depending of one switch only ?
thxx fo
Read more…hi,
i ve noticed when i do the testing of my sonar, that it gives a 21 cm distance, but in reality it s 8cm.
where and how can i change this value for have the right mesure?
thx for helping
best regards
Read more…hi,
i ve wired everything and almost ready to launch, but.... during the radio calibration process, i ve noticed that my radio (dx7) is seen as a mode 2 type :/
this is what i ve set on apm
ch1 thro
ch2 aile
ch3 ele
ch4 rudd
ch5 gear
ch7 aux1
ch7 aux2
this is
Read more…hi,
i would like to test my sensors, and not the one on the board, is there a way to bypass them and conenct mine?
i have:
thx for help
best regards
P.S because i already had a smart answer, (soldering iron) i would like to be able
Read more…Hi folks,
just a little message for tell you that i ve relased an android application about fpv inculding this forum.
i was tired to not see any app for fpv addicted people, so now at least there is one.
Look for MyFpv or fpv in android market, soon ava
Read more…hi folks,
i just got a complete kit x4 from feytech, been able to set it up without worries, quite nice stuff.
i have took the cgs option, but, in order to create autpilot flight, you need to create a map.
this is the procedure:
launch google earth (in f
Read more…hi folks,
glad to join this community and really willing to turn my glider into another diy drone.
i ve been looking here and there, and didn t find any tutorial how turn you plane into a drone using ardupilot from a to z, a sort of guide, for turn cla
Read more…
