Gender
Male
About
Location
Cape Girardeau, MO
Please tell us a bit about your UAV interest
SEARCH AND RESCUE
Hometown:
CAPE GIRARDEAU
Activity Feed
"awesome thanks so much!"
apm planner 2 will not let me upload a previous file only current stable.there is someting wrong with mission planner wont let me update firmware at all but apm planner 2 will work on my computer.APM planner 2 will let me upload custom hex file but…
"Nevermind this is what I was trying to do this is not possible http://ardupilot.com/forum/viewtopic.php?f=72&t=117461442518733..."
Building a mini wanting to use a Minmosd with the optional battery voltage monitors that are on board like the naze32 guys are using.I've been messing with this but I think it's only going to talk to mavlink to get voltage information. On a 250 size…
"I need apm tricopter 3.1.5
I'm not sure out of all those dates which ones are stable versions or are they all stable?http://www.rcgroups.com/forums/showatt.php?attachmentid=5401256&......"
I'm not sure out of all those dates which ones are stable versions or are they all stable?http://www.rcgroups.com/forums/showatt.php?attachmentid=5401256&......"
"Thank you sir I had found that but the tricopter hex is not labeled or im unsure how to read the file system not sure how its organized "
can someone please give me the hex files to 3.1.5 quad and more importantly 3.1.5 tricopter pleaseI cant find it online
"Reflash to 3.1.5 firmware run logs you need for diagnosis.
3.1.5 is the most stable in my opinion. After you remedy your issues that you would need terminal for reflash to 3.2.1 and recalibrate everything again.
Really not entirely sure if the…"
3.1.5 is the most stable in my opinion. After you remedy your issues that you would need terminal for reflash to 3.2.1 and recalibrate everything again.
Really not entirely sure if the…"
"I've had no luck uploading new firmware lately using mission planner.
I use apm planner 2 and works just fine to upload 3.2.1"
I use apm planner 2 and works just fine to upload 3.2.1"
I need a way to in flight toggle camera tilt stabilitization on and off any suggestions or is there a function for this I'm missing?
"or would you prefer a certain setting I could just IMU or what?"
"Ok I'll set it to log everything give it a spin tomorrow. Can I upload the file here or do I need to send the log to you by email"
I have a severe altitude drop on a left yaw. Right yaw slight at increase. I have swapped motor controllers ESC from left to right still have a problem and I have totally changed both clockwise motors still have a problem I cannot figure this out…
"Look at a s550 Hexacopter on ebay.
use 2213 or 2212 motors with 20 amp esc.
stay away from quadcopters unless your using a 4s or more battery they just don't have the thrust to keep a gopro and gimbal steady.
A 550 hex with a large capacity 3s and…"
use 2213 or 2212 motors with 20 amp esc.
stay away from quadcopters unless your using a 4s or more battery they just don't have the thrust to keep a gopro and gimbal steady.
A 550 hex with a large capacity 3s and…"
So this jumper, looking at the wiring diagrams and the directions I'm confused.I have 4 switching esc bec and a power module. I have the jp1 installed should I pull it?Everything is working I am keeping it in because I don't trust the power module…
