Location
Elm Grove, WI
About
About Me:
I'm a kid in elm grove. I am the most awosme inventor in elm grove simpily beacuse i am the only inventor
Please tell us a bit about your UAV interest
I have an idea for a mini helicoptor
Hometown:
elm grove
Activity Feed
"Gerard, are the beta design files for this board available on github or similar? I'm wondering if it would be feasible to achieve most of the design objectives you discuss on current hardware.
Most SimonK ESCs can be updated through the PWM cable,…"
Most SimonK ESCs can be updated through the PWM cable,…"
"If the point is to make it over for a short time, you could just use model rocket motors, otherwise you'll need a complex liquid engine. Supersonic jets are pricy for a reason.
just make sure your APM isn't flying! at those speeds, a few degrees of…"
just make sure your APM isn't flying! at those speeds, a few degrees of…"
"Oh Dang! Good Catch!
https://www.kickstarter.com/projects/1950990943/be-high-school-engi..."
https://www.kickstarter.com/projects/1950990943/be-high-school-engi..."
In a startling turn of events, The BEHS Technology and Engineering Club Kickstarter (NOT the IndeGoGo) was funded!. In less then 15 Minutes, we went from 286$ to 1036$! YAY! SUCESS!WOOHOO! (I'm excited)DIY Drones was our single largest affiliate…
"Ha Ha, mabey we will? Where abouts do you live?
I meant to change the title to brookfeild east, not BE. I must have forgotten, but I'll see if I can change it."
I meant to change the title to brookfeild east, not BE. I must have forgotten, but I'll see if I can change it."
Due to a lack of Crowdsourcing experience and an unreachable goal, The BE High School Tech Club Kickstarter was unsuccessful. Of our 1000$ goal, we raised 286$. With 6 days to go, it is not going to happen. But thanks to all who donated! DIYDrones…
"Thanks for the support! You're right that we are running out of time! Any suggestions on places to promote?
Also keep in mind that if we don't reach our goal we may fund ourselves the rest of the way. We should have used indegogo from the start to…"
Also keep in mind that if we don't reach our goal we may fund ourselves the rest of the way. We should have used indegogo from the start to…"
Hello DIY Droners! My Name is Tim Vrakas, and I'm a student at Brookfield East High School. I'm working with my friends raise money for the BEHS Technology and Engineering Club. Some of you might have seen my previous post announcing the start of…
"Oh Yeah!! Thanks!"
Hello DIY Droners! My Name is Tim Vrakas, and I'm a student at Brookfield East High School. I'm working with my friends raise money for the BEHS Technology and Engineering Club. We launched our Kickstarter today and we have 30 days to raise $1000!…
"I addition on the first-gen (100mw) OrangeRX openLRS from hobbyking the serial transport is non-functional. The code compiles, and the RC works, but serial is not functioning. When I downgrade to 3.5 it works. I tested it with a jumper connector the…"
"Just had this issue. I got 2 new antennas from RMRC, they are great. I got one stiff and one flexible.
http://www.readymaderc.com/store/index.php?main_page=index&cPat...
Stiff: http://www.readymaderc.com/store/index.php?main_page=product_info&a..."
http://www.readymaderc.com/store/index.php?main_page=index&cPat...
Stiff: http://www.readymaderc.com/store/index.php?main_page=product_info&a..."
"COOL! The question is, How to record the vibrations of a go-pro-like camera module? The Navigational IMU would not suffice, especially due to vibration damping. "
