Please tell us a bit about your UAV interest
building an hexa
About
Hometown:
paris
Activity Feed
"lets wait for some raw footage samples! hope it comes soon!"
"what do you think about the 65mbps vs 200mbps of a pocket?"
"and if HD is not enough....
blackmagic micro 4K
I have few concerns:
the mico has 65Mbps vs 200Mbps for pocket....
the micro cinema specs shows global shutter and 65Mbps while the mico studio 4K specs does not talk about global shutter and specs…"
blackmagic micro 4K
I have few concerns:
the mico has 65Mbps vs 200Mbps for pocket....
the micro cinema specs shows global shutter and 65Mbps while the mico studio 4K specs does not talk about global shutter and specs…"
hello guys,we are a dubai based UAV manufacturer and service provider.we've been working quitely in the past few years providing custom drones to film companies and individuals.Over the last 12 months we've been working hard to develop a compact…
hello,was flying today and suddenly the motors stopped and the copter fell. it was fortunately not too high and damage is mainly the landing gear.here is attached the log, if someone can tell me what may have happened that would help!2014-07-27…
"or complete... http://www.sdshobby.com/pixhawk-pix-pxi-px4-openhardware-autopilot-...
did not tried it... just saw it on the net..."
did not tried it... just saw it on the net..."
"I don't know about the steadidone but we are also selling similar copters (in X8 config as the quad is not reliable enough...already had one U8 defective...).
from our experience and users feedback:
- actually very stable, smooth to fly (it's like a…"
from our experience and users feedback:
- actually very stable, smooth to fly (it's like a…"
"nice, what is the link to the battery you used?"
"Hello,
Had issues on u8 motors and simonk rctimer esc. "Pop" noise changed back to my favorite tmotor 40A and all ok!
A bientot."
Had issues on u8 motors and simonk rctimer esc. "Pop" noise changed back to my favorite tmotor 40A and all ok!
A bientot."
hello guys, whats your recommendation on how to power a DJI A2 controller when motors runs on 7S or more...?A2 PMU is only 2-6S...
"I would not fit an 135kV with 29" on such frame... especially with the motor platform they have!"
"what do you mean by ground control hardware? it is just a remote and 7" screen on the video.
btw, interesting link for the carbon core.... but prefer the way we did it as the arms have no way to open (even though it may take 2min more to…"
btw, interesting link for the carbon core.... but prefer the way we did it as the arms have no way to open (even though it may take 2min more to…"
"@Eduardo: with gimbal but no camera.
in regards of turbulences... this is what we are now checking. we tested in 10knts winds and it was ok...could be better with an hexa and 330kv but still acceptable.
trying now to improve the setup.
the PID…"
in regards of turbulences... this is what we are now checking. we tested in 10knts winds and it was ok...could be better with an hexa and 330kv but still acceptable.
trying now to improve the setup.
the PID…"
"my biggest setup on APM is 18" props and that works fine"
