Help guys !I'm new to Arducopter but love the thought of open source and this site full of tech guys like yourselves !!Problem :- I have a f450 quad flown on kk2.0 board which flew great until I put…Continue
"No worries matey most of the firmware and updates will more than likely work with your gear I have both planforms and won't worry as I think youll still be able to do some great stuff with things to come ."
"The graph is abit random ! But got some help from another forum Multi Rotor UK and the guy spoke plain English, now know where I'm going and have a Quad that is loitering nicely and RTH like a dream Pushed my throttle mid point up…"
Hi guys my f450 is now in the air as a test bed for Apm 2.5 and flys extremely well in stab mode !Now trying to sort out my loiter mode : when I engage it we have a slight dip down and then starts to bounce descending and climbing not too alarmingly , and you can hear the motors pulsing up and down to make this happen ? Position seems to hold but alt is a problem . Any help for a solution is appreciated .DarronSee More
"You should only have one movement with one stick in the Mission Planner radio calibration screen.
Radio TX should be set in Acro (airplane) mode for APM.
Also make sure you are in Stabilized mode to confirm flight controls.
Are your stick…"
"Been flying for quite a while on same quad with kk2 board ! Today I held the quad after reducing power levels and found that tipping left or right the Apm works perfectly and try's to level the quad but front to back is reversed and a lot mor…"
Hi guys in my MP when I look at my values and movements all are fine exept the rudder stick, throttle up forward and backwards all move in sync but as soon as I touch rudder stick all values move as they should but do not return to centre as the other channels do ?? Surely they should centre or she would continue to spin ? would this be causeing my flips ?Any help would be great ... DarronSee More
"You also mention clicks on the transmitter it sounds like you have an airplane transmitter, which is going to be hard to fly copter with. You need a helicopter type transmitter, they don't have the racket set on the throttle.
I had a flip…"
Help guys !I'm new to Arducopter but love the thought of open source and this site full of tech guys like yourselves !!Problem :- I have a f450 quad flown on kk2.0 board which flew great until I put Apm on it !Apm right direction , escs all configured , flight planner all configured , levelled , radio configured , everything moves right direction ,Don't like the throttle cannot seem to make It smooth , spectrum dx7s two notches on throttle virtually half power , hold quad in hand and it goes…See More
Flyer for over 40yrs fixed wing and very new to this ...
Please tell us a bit about your UAV interest
Got an f450 at moment with 1000kv rc motors and kk 2.0 board and can fly reasonably and scare myself s------s at times ! I've got a Apm 2.5 coming soon and larger frame to put my gopro black on as soon as I've mastered the controller on the 450 frame I'll change her over ...... Great site Guys !
No comments yet!
You need to be a member of DIY Drones to add comments!