"Wow! Nice stable flight.
Can you post your PIDs? I am having a very hard time tuning my quad."
Jae Paik's Discussions
Monster Quad in Desperate Need of Reasonable PID
Started this discussion. Last reply by Derek Ernewein Jul 12, 2012. 7 Replies 0 Likes
I think I bit off more than I can chew. From looking at other configurations on the forums I may have built a quad that seems to be on the XL side. frame: Personal monstrous design. 3/4 Aluminum…Continue
Jae Paik's Page
Latest Activity
Derek Ernewein replied to Jae Paik's discussion Monster Quad in Desperate Need of Reasonable PID"I flew my 1000mm frame late last night. It leaned to the front right corner when trying to take off. Giving it more throttle quickly got it of the ground good though. I need larger landing gear to stop it from leaning.
Once it was off the ground it…"
Jae Paik replied to Jae Paik's discussion Monster Quad in Desperate Need of Reasonable PID"Yeah, I read that.
Seems like most tuning requires you to hold the quad in your hand. It gets pretty hairy with my monster. I will need to come up with some rig rather than holding it in my hand.
What's your quad's spec?"
"This is a good reference for Rate and Stab PID tuning on multicopters... http://aeroquad.com/showwiki.php?title=PID+Tuning
My quad is stable, but I'm about to put it through this process and see what I get. Then compare it to what I…"
Jae Paik replied to Jae Paik's discussion Monster Quad in Desperate Need of Reasonable PID"Yeah, at one point, I believe I hat the RateP to max but that wasn't helping much.
Someone is lending me their DX8 in few days so will try out the in-flight tuning feature.
Thanks!"
Jae Paik replied to Jae Paik's discussion Monster Quad in Desperate Need of Reasonable PID"Yeah, thought about slimming down the frame. Will need to scrounge up some money before going that step though.
Let me know how your behemoth takes shape and behaves. If you get it tuned well share the joy.
Thanks!!"
"Sounds like you should increase the RateP gain to make it not quite so sloppy, and adding some expo to your transmitter should help with the over corrections. Do you have a transmitter with rotary knob you can use to tune parameters while flying? My…"
Derek Ernewein replied to Jae Paik's discussion Monster Quad in Desperate Need of Reasonable PID"I am working on building a carbon fiber frame that will be 40 inches motor to motor. However, until all of the parts arrive (waiting on wire, connectors and screws) I have built the quad on a 450mm (17.5 inch motor to motor) frame that I got cheap…"
Jae Paik posted a discussionMonster Quad in Desperate Need of easonable PID
I think I bit off more than I can chew. From looking at other configurations on the forums I may have built a quad that seems to be on the XL side. frame: Personal monstrous design. 3/4 Aluminum tubing rigging controller/autopilot: APM2 esc: Turnigy Plush 60A motors: E-Flite Power 32 770kV propellers: APC 13x4 Electric motor to motor distance: 36 inchesbattery: Turnigy 20-30C 4S 5000 mAh total weight: ~8 lbs radio: E-Flite LP5DSMCan't seem to get this thing in the air more than 30…See More
Jae Paik replied to Ruwan's discussion Share your drone info thread"Thanks Knut. I have put the ESC's about half way on the arm. Once more props arrive, I'll try that out.
If that doesn't, I work will try putting the APM2 on a more solid platform."
Jae Paik replied to Ruwan's discussion Share your drone info thread"frame: Personal monstrous design. 3/4 Aluminum tubing controller/autopilot: APM2 esc: Turnigy Plush 60A motors: E-Flite Power 32 770kV propellers: APC 13x4 Electric motor to motor distance: 36…"
Profile Information
- About Me:
- Want to fly a quad
- Tell us a bit about your UAV interest
- Want to fly a quad for photography
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Moderators
24 members
-
ArduPlane User Group
720 members
-
Andropilot Users Group
203 members
-
ArduCopter User Group
1355 members
-
ArduRover User Group
207 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
