If I recall correctly the previous version of Mission Planner had an ESC/Motor calibration setup screen. However, this now appears to be missing. Any idea on how to do ESC/Motor Calibration now?See More
"So in conclusion in order to get the 9-21-16 build to work for a BBB Rev A6 (2GB), I used an SD card and did as Mirko suggested:
You can use the SD card as file system as well, you have to change the last line from /boot/uEnv.txt…"
"The error message is saying that it looked in /usr/bin, and arm-linux-gnueabihf-pkg-config does exist there, so I'm not clear on whether there is a find error, or it is failing on the symbolic link not resolving as there is no pkg-config…"
Per my earlier note from an hour ago, there is evidence that I did execute this step 11 successfully:
"lrwxrwxrwx 1 root root 10 Sep 23 09:13 /usr/bin/arm-linux-gnueabihf-pkg-config -> pkg-config"
Yet the 'waf config…"
"The file does appear to be on the path at /usr/bin and is a link:
lrwxrwxrwx 1 root root 10 Sep 23 09:13 /usr/bin/arm-linux-gnueabihf-pkg-config -> pkg-configYet the linked to file pkg-config does appear to be missing."
"I have had no luck trying to connect to the 9-21 build via SSH. This is after flashing it to a BBB rev A6. Only the D2 light is flashing, so its not quite the same as the 9-11 build. When booting off of the SD card for the 9-11 build there was not…"
"So for the 9-11 image I changed the line to: #cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh.
During the Compile step: waf configure --board=bbbmini I ran into the following issue:
Checking for program…"