I'm having the same problem but I'm using a Samsung Galaxy S2.
When you say "On tablet go to Menu, scroll down to very bottom...", which menu are you talking about?
The IP on my RC is 172.20.10.5. My Laptop is…"
"I had a similar experience, which was the ultimate reason I chose not to buy ugcs, in favor of one of its competitors, even through the price was much higher. For software like this, especially if it will be used in a business environment, support…"
"Normally, I'd agree, but I'm evaluating several other products at the same time, as well as running all my other projects, so I'm afraid I may not be able to complete the trials within the 2-week window.
Regardless, I'm in…"
"Two weeks is usually enough time to get over learning curve and understand where limitations are within UgCS and where in drone. To see how UgCS squeezes out more from, let say DJI, than you can get with native software.
There is also option…"
"Yes, I've read that page, and it was fairly instructive.
However, with the photogrammetry tool being disabled in the free version, and there not being an option for a trial of any of the other versions that I can find, I don't see a way to…"
"There are options to put "action on each waypoint" that means camera will be triggered by waypoint for each picture. Will add huge amount of waypoints, cause drone to stop at each, likely will run into DJI limitation of number of available…"
"I think I see the problem. I was under the impression that I was supposed to switch back to "P" mode after uploading the route. That must be the issue. I'll try again in "F" mode.
Reading further, do I understand correctly…"
"My guess would be about 36 man years, depending on the size of the team of course.
Software development is a HUGE undertaking.
I fully understand why photogrammetry was disabled in the free version. I just wish there was a trial of one of the higher…"
"No, it should not be and most of the time it is not as all connections of the drones are happening automatically.
As for not executing mission, have you set the drone to automode according UGCS Manual for…"
"Hey, that worked! I wonder why I had to do it manually? Oh well, it's fixed. :)
Now I have another issue...
I've created a simple mission to take off, fly a pattern around my property, and land back in the same general place.
Now that I…"
"Before support comes to work on Monday, please try following.
On tablet go to Menu, scroll down to very bottom. There you will see IP and UgCS Connection port. Write down those values IP and port.
Go to UgCS on PC, open…"
"My IP for the desktop is 192.168.11.11, the subnet is 255.255.255.0
The IP on the tablet is 192.168.11.18, it doesn't show me the subnet, but I have no reason to believe it's not the same.
It's somewhat baffling that there's no…"