"http://www.wtsdg.com/3dr/IMG_2555.MOV Here is a video demonstrating the problem."

"http://diydrones.com/forum/topics/defective-apm-2-0-with-built-in-gps-1?commentId=705844%3AComment%3A937647&xg_source=msg_com_forum After testing as per Jason's suggestion, I have confirmed that it is a defective solder joint. See the…"

"Just got a chance to test as per your suggestion. Sure enough, while in CLI Test mode, if I Power up the unit while lightly squeezing on the 12 pin connector on the GPS daughter board it sends data to the mission planner. "No Fix" I then…"

"My Fluke 179 is reading 4.987 VDC when powered by USB and 5.165 VDC when powered by the onboard UBEC. I get the 3D fix led on steady with both power supplies."

"Are you sure you're powering it at the recommended 5v? if you power it at too high a voltage (6v) the GPS won't work."

"Jason suggested that this might be a bad solder joint. Anyone know of a DIY for re-seating the GPS daughter board? Thanks in advance!"

"Are there any instructions/DIY's for removing the GPS daughter board and re-seating it. Maybe that would help?"

"G! is bad. That's the auto-detect not detecting the GPS. Try pressing on the GPS and restarting. It may work. If so it has a bad solder joint. I would just return the board."