"That is correct. From what people have said you MUST use the exact same batteries (mAh, 3S, C). This is because when the leads are connected to each other a battery that has a higher voltage can discharge into the lower voltage battery at an…"

"It is not a low battery buzzer (that might be useful). It is strictly for finding a lost plane or copter  Here is the link: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=14521 "

"hi well done . i just trying to pluck up the courage to go fpv. And thanks for explaining to MOHD FITRI how to overlay the HUD onto video feed . I will be trying it myself tomorrow . cheers"

"I fly my quad in an X but only so that props do not block the cameras. On an octo I would imagine that you will be mounting any camera equipment on the bottom, so I suppose it doesn't matter. Just my thoughts. By the way that is a gorgeous…"

"When I started flying I kept it low (10m) and found a field with a fence so that when I screwed up it would hit the fence and just break a prop, it worked very well (I took out a lot of props). I find that it is easiest to fly just as it starts to…"

"It turns out you can just start at the top of the list and choose one.  The screen will update with the firmware numbers after you make a selection and before you choose to load it.  It works well. Mike "

"Does anyone know how to do this?  I'd like to install 2.8.1.  Mission Planner wants me to pick 2.9.1.  If I select from the drop down list for older firmware I too get long lists of hex characters.  Which choice represents…"

"It may be a vibration problem. Going from 2.6 to 2.9 with the same mount made our flight much less stable. I added some foam to dampen vibrations and that solved the problem. You may want to try some sort of vibration dampening or trying an older…"

"i will keep it in mind when i will upgrade my gimbal! But for now i'm mostly interested in aeriak photography and not video!"

"yea i suppose but i am pretty confident it will deliver some pretty stable footage. And its a hell of a lot cheaper then the DJI zenmuse gimbal ;)"

"it looks good and promising, but it was quite expensive for a beginner like me... "

"there is also a 3axis version"

"i bought the last one, that costs 35 pounds! i hanent shot much yet, but till now i'm very satisfied! i will shoot some test footage now again, and i will post it!"

"What about this, looks really good for the price http://www.copterframes.com/index.php?route=product/product&product_id=120"

"They do ship to Canada (that is where we are). I love the design and the price is very reasonable. I notice that they have several different models, which is the one that you are using? As well you have a camera shutter control, which model is…"

"hi, i recently bought this gimbal  http://www.youtube.com/watch?v=sVGi414MamA, and it costs with the servos around 45 pounds and supports up to 1kg payload! It has Tilt and Roll control, as PAN would be useless since the landing gear would be…"