"Thanks Doug ! You were right on... The change from 0 to 1 in that line #define PRINT_GPS 1 did the trick. I now have GPS readings.
Regards
Mario"
shawn vatcher's Discussions
Error while compileing. I have had no luck so far please help.!
Started this discussion. Last reply by Bill Noyce Nov 5, 2009. 1 Reply 0 Likes
here is the error i get all of sudden when compileing ardupilot 2.3.1 and 2.4. very strange.dont know how to post images here so the screen shot of the error is attached.Error is as follows.In…Continue
GPS and Arduimu problem.
Started this discussion. Last reply by Mario Nov 19, 2009. 15 Replies 0 Likes
in the groundstation server screen data is comeing in good but the gps data is all zeros. im useing your ublox satelite adapter and your board to attach to the arduimu. i checked all my code and…Continue
EasyStar RTF Question.
Started this discussion. Last reply by shawn vatcher Oct 17, 2009. 2 Replies 0 Likes
i got my easystar ready to fly kit today and i was going to change the motor and other stuff but it appears to be glued together . does anyone know if it is infact glued or is it just stuck. eg. can…Continue
DATA Transfer problem with ardupilot and xbee 900
Started this discussion. Last reply by shawn vatcher Oct 7, 2009. 19 Replies 0 Likes
I have set up ardupilot with the shield installed and xbee 900's to transmit the data. all the blinking lights seem to be good. eg. i get satelite lock on gps. i also see data being transfered from…Continue
shawn vatcher's Page
Latest Activity
"i think in the earlier version that problem was a bug that has been fixed in the latest version wich doesnt reuire a gps i think cause it worked fine for me."
DeveloperDoug Weibel replied to shawn vatcher's discussion GPS and Arduimu problem.
"Hi Mario,
If you get a blue LED the IMU is getting GPS data and you have a lock. Check that you have #define PRINT_GPS 1 (not 0) in the code. You can turn on or off portions of the output data with the #define statements."
Mario replied to shawn vatcher's discussion GPS and Arduimu problem."Hello to all !!
I have both arduimu ver 1 and 2(flat one) + ublox GPS and adapter.
In virtual lab 8.5 ground test or processing ground test station I can see the imu working but I get only zero's on every GPS fields ( no lat and no long…"
Bill Noyce replied to shawn vatcher's discussion Error while compileing. I have had no luck so far please help.!"Hi,
It is one of the comments in the easystar.h header file, i think it was line 139
Is missing one of the forward slashes."
Error while compileing. I have had no luck so far please help.!
here is the error i get all of sudden when compileing ardupilot 2.3.1 and 2.4. very strange.dont know how to post images here so the screen shot of the error is attached.Error is as follows.In function 'void navigation()':error: 'The' was not declared in this scope** if you delete the line that is highlighted in arduino sketch it will compile fine. do we need that line?See More
"anyone having troubles getting signal lock with this shield, cant seem to get it. im useing the em406 useally locks on greeat"
DeveloperDoug Weibel replied to shawn vatcher's discussion GPS and Arduimu problem.
"I think there is some unused initialization code in ArduPilot. Take a look there for a starting point. Only thing I know is it is set up for a binary mode (not NMEA) and the baud rate should be 38400 (or whatever the standard value close to that…"
Benjamin Lanehart replied to shawn vatcher's discussion GPS and Arduimu problem."weird, I hit thsat button a few times, and the cube never shows, oh well..."
"does anyone have a ublox image i can upload to mine. my ublox was corrupted and when i reinstalled the firmware i lost all the settings and i dont see them posted anywhere. the new ucentre is different and doesnt have some of the settings were the…"
"i decided to try uncentre one last time and pop it took the frimware update. it was dead before but i just retried and retried and finnally it took. so it appears fine in ucentre but i dont know what to configure on it to make it compatible with…"
"well this post is not just a arduimu problem i cant get a lock on my adrupilot either. i used the sparkfun connection board to sync up with ucenter but even thats not working. im thinking my module is bad guess i will just buy another one and see if…"
"still no luck i have no idea. if anyone knows of a board out there that will let me interface the modual to the computer for use with u-center that would be the next step. cant seem to find one. sparkfun has a development boar dwill that do for this…"
"definetly has something to do with the gps. its runs the same with the gps disconnected and when it is connected. no signal comeing through. why this is happening im not sure for now. guess i will keep playing with it until i figure it out."
"yea for sure im useing 1.2. you can turn the cube on and off with the button on the bottom right of the labview screen. im pretty sure im not getting a signal lock for some reason. i will try a couple things when i get home and let you know."
Benjamin Lanehart replied to shawn vatcher's discussion GPS and Arduimu problem."wow, small pic...
let me know if you can see that..."
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
ArduRover User Group
185 members
-
Moderators
24 members
-
Documentation Editors
51 members
-
ArduCopter User Group
1295 members
-
ArduPlane User Group
687 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
