tricoptero kk2.0
ola preciso de ajuda em um tricóptero, como faço para estabilizar o motor de cauda do tricóptero etou usando uma kk2.1.x 1.19s1 pro
Read more…ola preciso de ajuda em um tricóptero, como faço para estabilizar o motor de cauda do tricóptero etou usando uma kk2.1.x 1.19s1 pro
Read more…[EDIT] Fixed the link
Hey guys,
Just wanted to introduce a new drone with 1 hour flight time: https://turncircles.com/long-flight-uav-drone-flir-thermal-camera-with-live-video-stream
Read more…
I'm getting a Phoenix 2400 Glider, with wiring completed already. I have two questions about this.
1. How can I add autopilot?
I am wondering if there is a guide for adding autopilot to this plane.
2. What parts are reccomended?
I read that the pre-assem
Read more…hexacopter APM 2.8 Can someone help me, I'm assembling a hexacopter with an APM2.8 controller and the motors are inverted on the board when I click on the test motor 1 the motor, 2 and that works I click the motor 3 the motor 6 works only one correc
Read more…I'm trying to build a plane, and I chose to use a Hee Wing T1 Ranger as the base, because there is parts available for VTOL conversion. I don't know what propellers or motor to use with this, however. I'm in a bit of a quagmire between buying the pla
Read more…hi there, I just traying reset my apm board and I have CLI conecting bur in fly mode is no conecting
I reload de firmware, reset de apm no results, any help?
Read more…Hi All,
I'm not sure if this is the forum to place this, but it just might be interesting to some of us..
A while ago I was waiting for having my car-tires balanced when I thought that must be possible with my motor-prop combination as well.
So what I d
Hello, this is an issue I have been attempting to get fixed for a while. I've tried two different forums... no luck.
I turn on my drone and turnigy evolution, and my TGY-iA6C shows solid red light indicating connection and transmtiter shows as being c
Read more…I'm trying to figure out how to connect the Spektrum dsmx compatible receiver to the F7. The power and ground connections are obvious, but where does the signal wire connect?
Read more…After I had a few problems with the standard power module from 3DR and the ones from Hobbyking, like falling off resistors (overheated) and burned out BEC from voltage spikes, I finally designed my own PM modules. The sensor boards are compatible to
Read more…Hi,
I'm trying a auto mission to fly over a powerline pole.If I approach it from one side it flies correctly, but if I try to fly over from a point that is farther from home point (avoidance_trajectory_2) it starts to fly in straight line to unspecifi
Hi all. I’m new to the site and I’ve spent the last few months doing a lot of research on drones. During the pandemic, I purchased a DJI Phantom 4 and had fun learning to fly.
I have a background in cyber security and Linux/software development. I wa
Read more…We got a grant and bought a Solo for the classroom. I need to get this thing registered with the FAA so that students can fly it. After visiting several websites I'm unsure about how to do this.
Does the drone need registered and anyone can fly it?
D
Read more…A coworker gave me an old phantom 2 vision+ that wasn't working anymore and I couldn't help myself. It's made almost entirely from my spare parts bin and I can say it flies well and doesn't look too bad.
Does anyone know the manufacturer of this drone?
I'd appreciate weblinks to the company.
Thanks for your help.
Hi
i am building a hexacopter with
1.) hobbywing x8 motors
2.) flight controller pixhawk PX5
3.) battery 12s 22Ah
4.) wheel base of around 1800mm
5.) estimated weight around 17kg without payload
i am looking if anyone has already tuned this type so i can ge
hello all
i am hoping someone can help me with this. Can a 3DR 915Mhz Telemetry module be connected to a Pixhawk 2? . With some cable modifications ?
This is a description of my idea for a new type of aircraft. All aircraft fly in 3D space, but must fly within an envelope determined by their construction. Airplanes (generally) can only fly forward into a conical volume. Helicop
Read more…