Hello,
I am using Pixhawk and was curious to see the datalogs. I was surprised to see that there is no detailed explication of the sensors or variables. I mean, some of them are covered at the website of the Mission Planner (link), but not all, like,
Read more…Hi!
I have just bought the module : https://store.3dr.com/products/wifi-telemetry-radio
It didn't come with any instruction. And i can't find them on the 3dr site. What's the default wifi password ?
I will use tower on my phone. Is this udp connection o
Read more…Hi guys, I was hoping someone could point me into the right direction.
I'm building a micro hover quadcopter from scratch. I 4 spots for the Propellers about 3cm (30mm) each.
The total weight of the drone is going to be approximately 6.5 to 7 ounces. D
Read more…I'm using ArduPilot solely as an AHRS/INS, and I need to send MavLink telemetry updates at at least 100hz to another process on the same system. My streams of interest (SR1_EXTRA1, SR1_EXTRA3, probably more later) appear to be limited to 10hz. Before
Read more…Anyone every been able to run mavproxy_cesium?
I've got the deps installed but after fighting for two weeks I'm about to throw in the towel.
I've tried 14.04 and 16.04 and no luck.
Read more…Hello !
I'm building a "small" quadcopter (330 mm) and I'm looking for a FPV system. For me the DJI lightbridge was a good solution with a Zenmuse X3 but the system is to closed (work only with DJI flight controller and frame).
Do you know a system
Read more…Hello. I am running MP 1.3.43 and Pixhawk hardware with 3.7.1 firmware.Tonight I had an experience that has not happened before. I was previously running MP 1.3.42 and same Pixhawk 3.7.1 firmware, and when connecting via telemetry radio I get the mes
Read more…Hi, 2017 is comming ! What are the popular drones in 2016? or what drone or FPV classes do you like to diy?
Read more…I ordered three separate sets of these because I wanted to make sure one would be the right chipset. This one is the genuine UVC dongle and works with the Tower app.$22.50 will include shipping anywhere in the us.Will include the USB OTG cable as wel
Read more…Here is some good news for you! Genstattu.com will be sending out 10 sets of the Wingsland S6 for you to review.
If you are a blogger, YouTuber, editor or anyone who is extraordinary active online. Or if you can make a big voice telling people what's
I read somewhere that you can have pixhawk follow another pixhawk or a ground station. If it were a ground station it would require using a GPS USB dongle. I have the dongle but cant find much information on how to set it up. Does anyone have exper
Read more…Hey guys I am trying to find the best folding props for my quad. I am using 4114 330kv motors. I got some cheap plastics on there right now. I got them originally just to get me by until I could find something that performed better. I am looking for
Read more…When I go to basic tuning, the sonar boxes are greyed out? im getting a responsive sonar though and seeing voltage and range readings. But am not able to implement it into the rover to turn when triggered.
hello everyone,
I have built a mutirotor for pesticide spraying(5 liters payload), the sprayer system has option to vary the pressure to adjust the rate of spraying.Now I need to know how to do the mathematical calculation with respect to speed,altitu
Read more…Hello world.
I'm running Pi3 with Px4
I have a custom mavproxy_ins.py module. Could you please explain how to access m.lat, m.lon and other variables in mavproxy.py instead of just printing them? Should I use global variables? I'm relatively new to Pyt
Read more…On YouTube I saw following video:
https://www.youtube.com/watch?v=oYs1x9qjjQM
Is there anybody who can explain how the library examples of Ardupilot are programmed on the PixHawk?
Read more…Hey guys,
So I'm in my final year of engineering and for my final project im building an object detection and tracking quadcopter. So a general overview, the idea is that to use a quadcopter's video feed to recognize a pre-decided object and to make t
Read more…Why a maximum value of 550? I understand intuitively why there would be a minimum value.
We typically see less than 6% mag field interference, but always get nailed by the max mag field length. Values are typically 680 to 790.
The integrated compass/ma
Read more…I've setup my survey plane with a canon s110 using CHDK, is there an upgraded Canon camera with better resolution that I can continue using CHDK with mission planner? Is there a better camera with the same size and better resolution?
Read more…Can 3DR be trusted?
I have been waiting months for a PixHawk Mini and a 3DR WiFi Telemetry Radio. I have been twisting in the wind. But I just now got an email from "3DR Success Services" sent by their "Operations/Fraud Specialist.". They want me
Read more…