Hi,
I attached log file URL (18mb), if someone could review and let me know if anything is off or wrong.
Towards ending of flight, I had no throttle. it went to 0% and no matter what range I gave it. Nothing.
It's possible I had no RC controls and not j
Read more…Hello All, i'm working in a bigger Tarot hexa, the TL6X001, i have the Tarot 340 kv motors and
Hobbywing 40A ESC 2-6S no BEC. (pls see attached img)
After flying 20 minutes (without payload) escs are really hot , yesterday i burned one in flight and l
Read more…Hi,
I want to share a review/comment we got recently. Our Kickstarter Project had quite some help through this community!
Here’s a link to my YouTube review of the Bat-Safe!
Awesome product!!! https://youtu.be/ASiLqVecXfQ
That's the o-tone, not altered.
Read more…Hello,
I recently built a 250 class quad that is ideal for FPV flying, and after flying it around for a little while line of sight I'd like to get into flying FPV. I'm looking at buying the Quanum DIY v2 Pro goggles, since they are cheap and apparent
Read more…HELP
I bought a XUAV Talon with wing extensions in 2015 and still haven't been able to fly it using waypoints and using the RTL. I am able to fly it manually.
The radio is set up with Manual, FBWA and RTL
Pixhawk with the latest Plane3.7 and Mission Pla
Read more…Hello, Iv just built my pixhawk quadcopter but I have problems with the neo 6m gps. I get 6 sats 3d fix for about 5 seconds, then 0 sats for about 5 seconds and this repeats forever. Are there any params I can tweak or its a fault gps unit? I have so
Read more…Hi all, hope you've had a merry Christmas.
I'm having my brain bent by a problem with APM on a Pixhawk and I just can't resolve it. Normally I find fixes for any issues I have on here or elsewhere but this has me stumped. The problem is in the title.
Read more…Greetings! I'm sorry for this noob question, but I would really appreciate if you guys could answer!
So I'm working on PixHawk which I would use on a quadcopter... so I'm required to obtain the dynamic parameters such as altitude and attitude (roll pi
Read more…So, I had an Iris+ meet the ground a bit too hard and I decided to scavenge all of the parts and build a fixed wing!So far, so good! In fact I have had just as much fun (if not more) flying the fixed-wing. The only problem I am having is with getting
Read more…Forsale
Brand in the Box
YUNEEC Tornado H920 Hexa-Copter with ST24 Transmitter
Complete Set 3199usd
Read more…Hi guys! I'm sorry for this noob post because I'm quite new to this research. But is there a way for me to export data from the Mission Planner into a text file or Matlab m file or something (in real time because log files are created after flight, n
Read more…Hello all,
We have a Flir Vue pro thermal camera and we’d like to Geotag thermal stills on a Pixhawk Multirotor.
According to Flir, it should be a plug and play over PWM.
But I also heard it’s not that simple.
Just checking if anyone’s able to Geotag
Read more…Hey all, well its been a frustrating time here with the newly purchased pixhack. I purchase a genuine CUAV unit and was told I could run APM/PX4 stack with out any issues, but I simply cannot do it.
I have done pritty much everything I could think off
Read more…Hi. I am working on a two rotor design with the hopes of having some efficiency gains by using two larger rotors. I have always heard that fewer larger rotors are more efficient than more, smaller rotors and took that for granted. Now that I am ac
Read more…Can someone suggest me a list of BLDC motors with thrust providing capacity of 6.5kg and wattage 1200W
Read more…As in the object, my quad with a pixhawk running arducopter 3.4.3 stable, can't execute "ROI" or the "Point camera here".
The quad perform Loiter, alt-hold and auto mission very very well, and even guided and circle mode works with no problem at all..
Read more…Greetings dears,
I am using APM 2.72 from HobbyKing and using ArduPlane. I setup the softwares, firmwares, and calibrations from the Ardupilot website's instructions. Mission Planner version 1.3.43 ArduPlane V3.4.0 .
My plane is an aerobatic plane (KAT
Read more…Hello
can Someone help to connect
Saitek Joystick X56 + Scherrer Tx700 Pro + Rx700 LR +PSU
in order to fly a quadcopter ?
And if it is impossible
How to connect the TX700 Pro and the Quanum V52 Ground Control System, please?
https://hobbyking.com/en_us/w
I have a drone with Pixhawk and PX4Flow camera. I want the drone to fly along a line on the floor. Is this possible? If yes, how do I do it? Kindly help.
Read more…I made a 250 quadcopter with apm mini. I'm running Arducopter 3.2.1. Initially I tried using the default pid values, it was quite twitchy, roll/pitch rate is 0.080 (lowest possible) later on I decreased stabilize roll and pitch values to 3.000 (cant
Read more…