Hi All,
I had an APM 2.5 on my plane for a couple of years and after the initial setup it performed reliably for those 2 years and was quite solid. Recently I decided to upgrade to the pixhawk and ended up buying two of them for two different planes.
Read more…Hi. When im trying to view .BIN file in missionplanner, i get error; FMT message missing from log. I have pulled logs before without any problems. Only thing that have change, i had telem connected to tower app. Could that affect so that im getting t
Read more…
Gemini IR-HD is a professional 3-axis gimbal for aereial inspection and survey with onboard FullHD 10x zoom camera able to support Flir thermal cameras Gemini IR-HD is compatible with any drones that that can sup
Read more…I decided to throw this out there hoping some folks would have good information on the subject of wire insulation types.
I'm regularly frustrated by PVC insulation that is A) stiff, B) nicks really easily thus ruining the wire, and C) doesn't strip cl
Read more…I am looking to contract some one who has knowledge about quadcopters, mission control software, autopilots etc. I just really need some one who can help me out with sorting through all that I need for a commercial type of drone. Email me with what y
Read more…Hi I am designing a hybrid drone, my problem is to get a correct roll setting, it oscilate to much, specialy in the loiter mode.Does any have sperience with this projectIt happens when I install the hole wing ( see the pictures )
Read more…We purchased this for a project and no longer need it. Please contact me for details. Comes with everything that came with when new.
Read more…Hey all, I just started an independent #slack group focused on having great conversations around commercial drones and really trying to leverage sharing information globally.
This is a prime place to be if you already work in slack daily.
If you want t
Read more…I have gone through 2 air telemetry's without using either in the air.
I connect it to the Pixhawk and after trying them out a few times and while they were working on the ground, both have blown or now do not work. No LEDs show. Can anyone tell me wh
Read more…Im at a loss here. I did all the research I could find and I havent been able to find what I am looking for. I have a Naza M flight controller and the STorM32 2 axis gimbal from goodluckbuy. I have a Taranis with channel 10 mapped to the right side l
Read more…UPDATE: Found one on Ebay for a great price. Kept searching for a week for sales with Offers. Made offer, got a an amazing deal. Don't be afraid to make a lowball offer!
Hi Everyone,
Looking for a used Iris+ that flies.
No gimbal necessary, but any conf
Read more…Hawkvision is a field proven, uncooled thermal imaging camera meant for surveillance and inspection applications from sUAVs/Drones.
The camera core is smaller than 25mm x 25mm, weighs less than 40g and consumes low power (longer flight).
The camera cap
Read more…Hi all, My setup is as follows: Pixhawk running Arduplane 3.2, RFD 900, Futaba s3005 servos on all surfaces including throttle, Gasoline engine. I have been using pixhawk along with an electric powered plane without servo issues.In the above configur
Read more…I'm using an APM2.6 board, and a 3DR voltage/current sensor board. I had to adjust the voltage multiplier upwards in order to get the voltage readings correct
BUT...
If a 4-cell LiPO has measured internal resistances of 4,4,7,6 milliohms (respective
Read more…I have a Iris+ with the Iris+ FS-TH9X controller.
I found one of my switches was broken today. Does anyone know where I can buy a replacement switch?
If your looking at the controller it is Top Left Rear switch. It is a spring loaded switch and not a t
Read more…Hello Everyone,
It is my hope to meet someone from my state of Kansas
That would be willing to mentor me a little. I have
APM 2.5
Thanks Everyone,
Darrell
Read more…hola soy nuevo aqui Estudio Agronomia Y Necesito contactar Con Alguien Que PUEDE MODIFICAR EL aplicación TORRE ESTO CON EL FIN DE agregar nuevos modos de vuelo espero de su ayuda saludos
Read more…In Aviation E Brief today it is reported that The FAA have received more than 325,000 UAV registrations making more drones than piloted aircraft at 320,000 in the USA!
2 points from this.
1) Time for a rename of FAA to FDA Federal Drone Agency? or I w
Read more…
This is a discussion to focus the feedback and support of ardupilot on the PixRacer board from AUAV.co.
We believe that all teething problems encountered are now resolved and so we recommend people load Copter-3.3.4 which is available for all multicop
Read more…Hi all,
In Mission Planner (1.3.34) > FlightPlan > right click >Map Tools > KML overly.
I have a KML which calls a PNG to be overlaid.
Problem is that for some reason the PNG does not show up.
Can anyone tell me the KML sysntax needed for this?
right n
Read more…