Hi All,
I was wondering if someone would be able to shed some light on this issue.
We have an X8 copter and are trying to fly very accurate (RTK GPS) low altitude (~5m) small scale missions planned using Auto WP > Survey (Grid) with very high side and
Hi all,
I was just wondering if anyone has used any of the popular 3D mapping solutions like Pix4D or DroneDeploy to map an area with the Spark?
The Spark does not support waypoint flying so I guess you'd have to fly it manually.
I could do with some so
Need some assistance on PDB selection. Going to be running T-Motor U3 700KV motors with 40A ESC's. What will be a good distribution board for this system.
Read more…Hi everyone,
I'm new here, and I'm facing problems with my diY F450 quadcopter
My name is Greg, 42, French. Thanks for the help that can get here.
Here's the link to the kit I bought on aliexpress :
https://www.aliexpress.com/item/DIY-F450-Quadcopter-Rac
Read more…Got a Brand new PX4 PIXHAWK 4 Holybro,
ESC is Turnigy MultiStar BLHeli-S Rev16 ESC v3
motors rctimer sl2212 920kv
3s tattu lipo 10000 mAh
using QGC and went with Hexa x build
On powering with battery, tone is
beep beep beep ----- beep beep beep ----
Here is a cinematic video, shot entirely on my DJI Spark.
And for those of you who are wondering, it is upscaled to 4K.
Enjoy!
Read more…Just put together this article on the current state of drone delivery in 2018 and what it could look like in 2019: https://mydroneauthority.com/industry/drone-delivery/
Includes the societal benefits, economic considerations, etc.
Thoughts and opinions
Read more…Benewake new long range LiDAR TF03 is released for drones/UAV/copters Precision Landing, Anti-collision, Altitude Holding, Terrain Following, etc.
The TF03 is compatible with Ardupilot, and works with IRLOCK precision landing system, welcome to test i
Read more…primitive system of evasion of obstacles for autonomous mode for copter.
I have always wondered why there is not a consensual way for an obstacle evasion system in automatic mode.
There are some solutions to this problem in the market but,
I find it cur
I have a Pixhawk mounted on a S500 frame. I want to know where should I place the companion computer? I have an Odroid XU4. The bottom of the frame is taken by the battery and the Pixhawk is on th top frame. Where should I place my Odroid? I can put
Read more…I am having a problem with Mission Planner where it will not let me set up CH7 and Ch8. My desire is to get ch8 to work as a relay on AUX 5 or 6, but I have no option to do this. This is also preventing me from getting motor inter-lock to work as wel
Read more…hello, my name is Dave, I am 71 and I own many drones, but my real interests are so modifying existing drones and building quads and hexas. Had an unexpected delay after loosing the sight in my left eye but all good now. I have 2 hexas on my bench at
Read more…Estoy desarrollando un uav desde cero, tengo el código arduino +nrf24l01+ esc 40A+turbina 70mm EDF
Read more…Hello,
I am trying to set up a flying wing under ardupilotplane 3.9 on a PX4.
I am not able to get PWM signal on auxout or main out connector.
I am sure I am missing somethink but?
Is there a parameter to set?
Using Miision planner I can see chanel 1,2 a
Read more…What would be the best program to be able to run real time diagnostics during flight such as power output of each ESC?
Read more…I'm wondering, is there a document to assist with new design preliminary sizing that lists weight, battery capacity, endurance etc for many commercially available drones of various sizes?
Read more…