All Discussions (17280)

Sort by

OpenVulture Linux based autonav

Hello all,We are working hard on our OpenVulture software that is to be released at the Shmoocon 2009 conference in Washington DC. Our goal is to give a live demo of the software.The software is Linux based and is designed to be easily extendable to

Read more…
1 Reply

PDC10 Instructions/Help with setup?

I'm totally new to all of this, just bought a PDC10 and need some help getting it running. I was going to attach to a model car for starters and then progress to aircraft.Has anyone got a copy of a manual they can send to me? or help on what i need t

Read more…
1 Reply

NMEA code parser

I wanted to share this NMEA parser code, according to the DIYDrones "should I write a blog post" guide it is best to open a discussion topic about this. You will find the code in attachment.I have no idea if this is anywhere near efficient, but it wo

Read more…
2 Replies

Range of UAV's

We don't know much about the range of the smaller UAV's out there but we just got our first range numbers back. We are looking at a 150 miles combat radius with 20% fuel reserve. What has been the combat range of other UAV's with the capability of ca

Read more…
1 Reply

LONG RANGE CONTROLLERS

i need to know about transmiiter to control my rc plane upto a distance og 40 miles.futaba , spectrum etc range is max upto 5 miles !please suggest long range tx or how can we modify futaba etc for this long range??

Read more…
1 Reply

Brushless and ESC help

I’m using a BP brushless motor and BP ESC with a 3S Lipo battery, and I use a microprocessor to generate a PWM signal (1ms – 2ms rate) for the ESC(with a BEC). The PWM generates 100% duty for the ESC, but the motor sometimes spins, and sometimese doe

Read more…
9 Replies

IMU 5Degrees of Freedom

what all do i need with the IMU 5-DoF board to use it as an autopilot system for a uav ? I want to develop an autopilot system for my quadrotor UAV. What all should i combine with this to make a rtf (ready to fly) autopilot system?Thanks.LINK- http:/

Read more…
1 Reply

IMU 6-Dof

what all do i need with the IMU 5-DoF board to use it as an autopilot system for a uav ? I want to develop an autopilot system for my quadrotor UAV. What all should i combine with this to make a rtf (ready to fly) autopilot system?Thanx.

Read more…
0 Replies

UAV CONTROL THROUGH 2.3GHZ WIFI.....

Ok, somebuddy told me earlier not to write in capitals so this time in small case!!!My uav structure is ready!!! i have a IP camera on uav!!! i have a data link WIFI 2.4ghz 802.11g range is about 25 KM (LOS)or more only 4 video streaming!!! dont ask

Read more…
2 Replies

Autopilot issues (urgent)

I am making a project on UAV, for submission in my college. I wanted some knowledge about a cheap autopilot for my UAV. Money isn't a problem for me, but one of the project requirements is that, it should be a "low-cost concept". Please help me out,

Read more…
2 Replies

EM-406a GPS Module damaged???

Is it possible to damage the em-406a module with the serial connection??It worked finde under the NMEA data format.I included the ardupilot GPS code in my projekt to configure and read the module.Now everything is dead! No status LED, nothing.It is s

Read more…
1 Reply

UAV DATA LINK----- 802.11G

I AM WORKING ON A UAV THAT WOULD BE CONTROL BY WIFI 802.11G DATA LINK . I ALSO WANT TO STREAM THE VIDEOS FROM MY UAV ... WHAT HARDWARE I NEED ON UAV . I THINK ONE IS WIRELESS ADAPTER. CAN WE CONTROL UAV AND STREAM VIDEO TO GROUND CONTROL SYSTEM SIMU.

Read more…
2 Replies

Activity

Jose Araujo liked Jose Araujo's profile
Aug 29
spencer harvey liked spencer harvey's profile
Jul 9
More…