Pixhawk2.1 Discussions (11)

← Back to Pixhawk2.1
Discussions Replies Latest Activity

2 GPS Setup

I am little confused about two GPS setup. 1. My main GPS is a "Here GNSS" with 8 pin connector which will go into GPS-1 Port. 2. Now the 2…

Started by iSkyMaster

0 Mar 15

Pretty big crash today. error radio-2. Large quad 40" rotors

Hello All,     Had a pretty rough go of it today. We were flying at 8-10 feet today, doing a little tuning in stabilize mode. Craft was loo…

Started by Jon Turner

2 Feb 23, 2018
Reply by Jon Turner

Moving from Mikrokopter to Pixhawk 2.1

Hi I am starting to build new octocopter based on Pixhawk 2.1. I have few years of experience in building and flying custom Mikrokopter cop…

Started by Norimbo

1 Feb 22, 2018
Reply by Paul Tegler

Discuss choice and application of GPS's to use with the new PH2.1

Ken McNamara sent a message inquiring about what GPS to use with your new Pixhawk 2.1: I believe this is a great subject for a new discussi…

Started by Simon L.

8 Feb 12, 2018
Reply by Simon L.

Pixhawk Autopilot to 8 (MT 3515) motors + 2 x 10Kw motors.

Pixhawk Autopilot to 8 (MT 3515) motors + 2 x 10Kw motors. Hi, We need a consultant in the East Anglia area (preferably in Catfield, Norfol…

Started by Haslen Back

1 Feb 12, 2018
Reply by Richard McCarraher

External LED for Ph2.1

HI Guys Where would the best place be to get an external LED for FC status ? Thanks

Started by graham newton

2 Feb 11, 2018
Reply by graham newton

PixHawk 2.1 - JST GH connector specs & ordering

Occasionally it seems that even with the excellent cables provided with the Pixhawk 2.1 - you'll need to make a special cable. 9 of the co…

Started by Ken McNamara

8 Dec 2, 2017
Reply by Ken McNamara

Pixhawk 2.1 - issue with I2C2 port

I have been trying to get my digital airspeed sensor to work and while doing some research I came across this post that claims that the "I2…

Started by Simon L.

22 Oct 10, 2017
Reply by Alex

PixHawk 2.1 - JST GH connector specs & ordering

Occasionally it seems that even with the excellent cables provided with the Pixhawk 2.1 - you'll need to make a special cable. 9 of the co…

Started by Ken McNamara

0 Oct 5, 2017

Photo album - my fixed wing test platform : The Junco III

This is the first plane I will attempt to automate with my new PH2.1: She's called the Junco3 , has a wingspan of 48 inches, weighs 2600Gr.…

Started by Simon L.

1 Jun 4, 2017
Reply by Simon L.

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service