"thanks for the reply :)

Great to know the profile is there at least. I have some work to do on the airframe but once I've done some testing I'll let you know how it goes, maybe on a new thread.
Cheers,
Adam"

"just dropping back in to this post to see the current status of VTOL support in the 3.2 release? Specifically tiltrotor Y6 configuration? Looking to get out of Mission Planner altogether if possible but we need that VTOL support for our firefly6.…"

"ah great. I have a few spare plugs for that. Thank you."

"ok but where do I draw the 3.3v from? The AUX ports?"

"the board I want to power draws 30mA"

"Just to add to above, I also tried on a windows 8.1 machine I had. Still nothing."

"Hi All - having a bit of an issue with my RFD900+ I hope someone can help me out? I'm getting solid green LED with the radio plugged in via usb and the aircraft powered up, so that side is working, but I cannot connect in mission planner. I can't…"

"Hi guys - exactly the question I was going to ask, glad I searched first. We've been using UgCS with the P4 for about 5 months and it's great, but we're moving into more fixed wing and VTOL airframes (all using pixhawk) for long range surveillance.…"

"Take a look here: http://forum.ausrocketry.com/viewtopic.php?f=32&t=5240
This uses 3DR radios direct to GPS module, should do what you want it to."

"Hi Cala - really interested in your robocat pixracer built, I'm just about to build an alien frame with pixracer. Could you tell me about your experience with flying the quad went? Did the GPS function well mounted low to the frame and did you use…"

"Thanks Alexey, that's a good workaround. I do like having the telemetry on my laptop though and I pretty much don't touch the controller at all when I'm using UgCS unless the landing area is constrained. I'm also going to contact Healthy Drones as I…"